Just an update, I put about 20 miles on it today. I completely rebuilt the engine so trying to get some miles on it to get thru the break in period and tweak the tune before I take it on a road trip...
Type: Posts; User: Phestezio
Just an update, I put about 20 miles on it today. I completely rebuilt the engine so trying to get some miles on it to get thru the break in period and tweak the tune before I take it on a road trip...
I actually read that thread the other day when I started searching for info. I usually try to do as much forum searching as I can to find the answer before I post myself haha. Only thing with that...
Well I gave the van its maiden voyage and I do not have any speedometer so something isn't right. BTW this is in a sprinter van so I effectively changed gears and tire size since I'm using the...
Sorry I can post a tune file if need be. I didn't think it would be necessary for this question. I am running a 6L80 so it does have the TOS and I already did a Tire/Gear wizard to change the final...
Before I just start playing with it to see what works I was curious what exactly these dropdowns do in the calibration tab under the speedo section. Of course when you hover over it gives me a...
Just an update, with the starter checks and starter diag turned off the engine starts and runs when I manually jump the relay like you described. Still not sure why it won't start the way its...
I was not 100% sure exactly what the starter checks was used for. The description in HP tuners was a bit vague but figured I would just try it. So with starter checks turned off in the PCM I should...
I see, I knew you could not write to different ECM without another license I just assumed that applied to any module. I did pull a full file of the stock truck before I stripped it down so I do have...
Just to make sure i'm not misunderstanding exactly how the licensing system works with HP tuners. So when you say if its already licensed you are referring to the new TCM correct? I was under the...
Its not that I think that it has everything it needs to work since I know it needs to be programmed and its obviously not working haha. But I do not know if not having the TCM programmed on a 2011...
I had thought about trying that just to see if that makes a difference. I did a quick check of the CAN bus with a meter and everything seems intact and right where it should be. I did look at data...
A bit of an update. I did a quick check on the CAN bus. I did not scope it but with a quick meter check I have 2.3v on CAN LO and 2.7v on CAN HI and a resistance of about 58ohms. It seems like the...
Trying to get my project running. Its a sprinter van with a 5.3 swap out of a 2011 silverado. I used everything out of the donor truck and removed any wires I didn't need, mostly from the interior...
Trying to get my project running. Its a sprinter van with a 5.3 swap out of a 2011 silverado. I used everything out of the donor truck and removed any wires I didn't need, mostly from the interior...