Search:

thank you

Anyone?

Nothing?

Alright, i'm getting closer and closer to useable here. Few days ago I was driving and pulled to a stop and noticed the engine (warm at this point) was surging. I believe I have an issue with my #2...

Kinda need to know lifts and durations for better idea of tune. Easy to get from rockers and a dial indicator and some time.

Long ago (about 4-5 years ago) I ran into a problem with running a TH400 also. I ended up taking the traction control sensor off the rear wheel (which would read erroneously if spinning out) and ran...

You should be able in the Scanner to open the Table Display.
Select an empty (unused) parameter block and 'Insert'.
The popup for Insert PIDs should come up. Select PID List - Engine - and I...

Took for a bit more of a spin and made more adjustments to the abs/vss tuning...

Alright, took it for a brief spin this afternoon and had speedo for the first time since the trans swap. Minor tweek needed there but irrelavant here.

About 1:20 into it I let off the gas and the...

Alright, crank sensor appears good in place, wires good, crank moves on .0007, .0008 and .0011. Changed out my passenger O2 on a friends read of the logging...

Worked much much better. short...

minding our own business just about to decide what dinner plans we had and suddenly the engine starts bogging at constant throttle. Not cruise control, but foot control (no cruise any longer). ...

Is the exhaust flow length shorter than normal?

ebay shows it to be an 05-06 Denali/Yukon ECM.

Working yet?

5_0, slow down and lose the 'tude.

If I remember correctly, it'll cost credits depending on which vehicle you've go either 2 or 3 credits (100-150) to edit it yourself with his programmer.

JB Weld . . . rivet . . .

You've got my number.

Josh, someone on CL today had a Spohn T/A package for a decent price here in town.

Also, if you use the F1 function on HPTuners, I think theres a definitions section in the help functions.
...

I think the power is nearly there. . .

http://www.youtube.com/watch?v=ZivvG2Ek8JM

Power + sticky track = ring and pinion on standby. . .

Alright, took a few days off and I'm done with the VE table tuning and near complete with MAF tuning. Down currently to errors averaging 3-5 and a couple cells reading 8. I've started doing the...

I thought the PE to 1.00 was for VE tuning and not WOT...

Latest and greatest. Please opine.

Said that. . . .

i've been consistent today :)