I just down loaded and installed the latest version 4.22.12 on a new laptop and all of the folders are empty. If I go to the main Hptuners folder and open Logs and tunes, Settings etc the folders are...
Type: Posts; User: bigfatls6
I just down loaded and installed the latest version 4.22.12 on a new laptop and all of the folders are empty. If I go to the main Hptuners folder and open Logs and tunes, Settings etc the folders are...
I had to create a new account in May and now had to request a new password. When I log in It does not show my interface. I tired to add my MPVI and it shows it belongs to someone else. I have the...
Mowton How important is the short pulse adder and the offset?
I have the calibrated Success spread sheets from 2009 but cant figure out how use the short pulse adder info it doesn't match up. The data is for a 2001 Fbody
did you get the correct injector data for the siemens 60s?
Im trying to transfer the data from the spread sheet to the tune on my 2001 fbody. The info on the spreadsheet for the injector offset manifold vacuum is in multiples of 10 and the tune has multiples...
The fast 60lb is the same injector as the siemens deka 60 just sold by fast
Is there anyway to get the old VCM suite version 2.24? I have it on an old laptop just trying to install in on my new laptop
I have these injectors in my truck and Im trying to verify that the tune has the correct injector data. I read that the same injectors came in the 2010-13 6.0 trucks and pulled up a tune for a 2012...
The truck has been tuned before as it already had an after market cam, Header, and stall in it when I got it. All of the part throttle stuff is close but the WOT in PE is rich. Im doing a lot of...
I just stole the GTO scanner from above and loaded it up and it looks like it might work. I looked at the link you posted also looks like a lot of good info Ill be reading as well. Thanks!!! It looks...
anyone have a good scan configuration for Maf tuning on a 2007 Silverado or sierra truck? also maybe a VE scan configuration.
I'm fixing to start tuning my 07 Sierra 1500 and it will be the first gen 4 I have played with. None of my gen 3 config files work for the gen 4 truck. I'm also still using version 2.23
Who do I contact to get the 3.1 beta? My buddy has the 3.0 and he just reloaded 2.24 because his RTT didn't work on 3.0
Im trying to get the real time tuning to work with my 10" Acer aspire one lap top but cant get it to work. It works fine on my larger gateway laptop. Ill post the error message and the tune file....
I cant get the real time tuning feature to work with version 2.24. I have already loaded the 1 bar speed density enhanced to file and did write entire. When I open the scanner and connect I get a...
I've been trying to Help Erik out with this car. We tried unchecking 101/102/103 and also high rpm disable under dynamic airflow set to 8500 rpm and still does the same thing. I attached the tune...
either they changed it or you did not read it all. I used the same one years ago and it works. In the maf only guide they show to change several tables. Tells you to go into the closed loop closed...
There are a few threads on here with the correct injector info you need youll just have to search. If the motor is stock you should be able to copy over the tables and take it easy on it. No wide...
Yea I'm pretty sure it's a 4l60e. I have to delete out some of the codes that won't apply on the 69 camaro. But just mainly looking to get the car fired up and running tomorrow. I didn't think to...
A buddy used a 2004 truck 5.3 computer with the motor and pedal assembly in a 69 Camaro swap he did. Is there any thing other that VATS that needs to be changed for it to start? Motor is completely...
http://www.hptuners.com/forum/showthread.php?16861-hesitaton-problem&p=121096#post121096
Here is a how to with link for the scan config from one of the best in the business. You'll have to do a...
Im looking for the injector data for a set of Lucas injectors. They are rated at 38lbs at 43 psi and like 43lbs at 58 psi.
Thanks in advance.
Sounds like its in limp mode.
Im looking at running my new build strictly SD. What changess need to be made if I plan to run SD all the time? Can the tune just be left the same as when I tune the VE table? I have tried searching...