its a rewired harness from someone out central texas,im getting this vehicle second hand and its been a pain.i believe it all came from the donor 2018 denali but the trans was switched to a 8l90 from...
Type: Posts; User: KSD
its a rewired harness from someone out central texas,im getting this vehicle second hand and its been a pain.i believe it all came from the donor 2018 denali but the trans was switched to a 8l90 from...
Having a bit of a time nailing down a throttle code issue im having
Setup is as follows
2018 6.2 l86 8l90,motor has forged pistons and rods,BTR stage 2 blower cam,Whipple 2.9 blower
Stock heads...
same issue here
going to try to email support to see if theres something they can assist on
I have a mpvi2 and have the pro link cable
How or what is the process on getting a new cable ?Is there a exchange for the old cables to the new ?Are there new Pro link cables available ?
makes sense still have a question as far as the data for these is concerned
Does anyone know what the short pulse numbers and if the offset tables are correct ?
its a old thread but i have a question
on the spreadsheet it lists most everthing except short pulse limit and also injection timing boundary .Is that data available or is the data on a stock 411...
delete
Having issues with a mvpi2 and writing tunes
I can pull a tune from a pcm but once I write to it I can not pull the tune back out or make changes and rewrite . I get controller exceeded number of...
the very thing i dreaded upgrading from the MVPI1 to this new one is happening .
I as well cant get the thing to upload new Credits.Why not give us the same appication key system as before ?Now its...
139546 and 139937
I provided the screen shot the files in question as well still zero response .so I?m not fighting the solution .it amazes me how we as tuners invest tens of thousands of dollars and have no telephone...
Have been a hptuners user for years and kinda disappointed in the customer service so far ?lack of?
I have a older mvpi1 and wanted to upgrade right before the ?new ? mvpi2 was going to be...
Just updated to 4.0.12 because i needed to use a repository file to compare to my old 3.0 file and some adjustable parameters are missing or changed
cant find the shift lock tab under...
In reading here there seems to be a workaround for non can pcm',i.e. Ls1 with mvpi non pro cables .cab anyone explain how or if hptuners supports these with the aem obd2 wb?
using stock MAP sensor
Should i at 15% to the IFR and leave the offset table alone ?
anyone?tunes are now unlocked
just re uploaded the tune files Unlocked .I thought they werent locked sorry for the mixup
Anyone have any idea ?????
Could use some help here
Im having a issue and hopefully someone can point me in the right direction
I have a 6.0 lq9 with a tvs1900 runing 42 lb injectors from magnuson.
I have the magnuson supplied injector data and...
I got this injector data with my SD60 "Tall "injectors part number 107961
can someone look over my tune to double check the injector data is correct ?
Thanks in advance
This may have already been answered,And i did use the search feature .
Using 3.0 scanner and imported the MAF-ltft.cfg file that alot of us have used before but it no longer works IE scans.What...
Have a odd issue and im trying to just cover all the bases before i take this motor apart.
Have a 03 4.8 that i installed a vinci 045 cam 278/286 585.585 115+5
motor has long tubes and a exhaust ...
as far as raising the proportional idle and integral idle thresholds ,Whats a decent amount to start with?? the bulk change was done in the lower cells because everthing i read here suggested to...
heres the file unlocked
Installed a thumper cam in a bone stock lq4 with cable throttle thats in a silverado.
cam spec is 275/295 .050 219/233 with a 109.0
lift is .554 .537
truck has a 2400 stall tq converter and...