Search:

oh, I didnt know that it would just carry on, That helps alot. Also, I noticed my ETC injector disable under ETC limits, was set to 0 for all cylinders to drop out on torque management. I set them...

I had it at .74590 but the g/cyl still was hitting 1.3 and my map only hit 1.2. I increased it to .8 swinging for the fences on this fuel cut. Ill do a few more pulls this week trying to log torque...

Ive been tuning on my truck for a few years and have started bumping the boost and now ive hit a wall. My truck, 2000 silverado ext cab 1/2 ton. Im running a 6.0 lq4. Tick stage 3 turbo camshaft...

1999 silverado extended cab 2wd. Running a stock long block 5.3 with Tooley springs, hardened push rods and Tick performance stage 2 turbo cam. Circle D 3200 stall in a built 4l80E. 3.73 gears and...

How much boost can a stock 5.3 take. What kind of rpms do you spin and what kind of timing are you running under boost. Im running 8 pounds and 16 degrees and shifting at 5200

Having the knock sensors unplugged pulled timing out. plugged them in and took some of the knock retard out and now its doing what I want. Thanks for the help.

I had my knock sensors unplugged. Would that automatically retard the timing since it cant read a knock. Sorry, I thought the data log I posted was a full run. Truck runs pretty good, I just know...

LOL, What im looking for is 16 degrees at 4k rpm and .920 g/cyl. I dont know why its just 13 degrees advanced when ive got the timing table set at 16 there.

its gets to full temp

The part that sucks, is I paid $300.00 for a mail order tune from HI tech tuning and he got the truck running. Then just up and left, never heard back after 5 tries. He couldn't get my wideband...

I don't know what I'm doing wrong. I cant figure out why my timing wont do what I want it to. I'm trying to get about 16 degrees advance and I'm only getting like 12. I don't what to do a dramatic...

Ill try to post, but what info is needed. The entire tune that I have at the moment? Sorry, for the questions. How do I look at a tune in the repository without using credits? Ill get the hang of...

Thanks!!!

Im having a hard time getting my truck to idle in gear. Ive tried the idle relearn and it idles great in P/N. In p/n, its about 12-1 afr. In drive at idle it goes to 16-1 and climbs up from there....

perfect, thanks
Now to try and get this thing to idle.

Im trying to figure out my idle on my 99 silverado. I installed a tick performance stage 2 turbo cam. Im trying to get it running before I put the turbo on in a few months. The problem is im...

Hi, I'm looking through the forums and Im noticing alot of how to tuner files. These all look great, but I dont have all the same tabs as Im seeing on the forum screen shots. I have a 99 5.3...