Looking to see if anyone has a stock cl file they are willing to share.
Thanks in Advance
Type: Posts; User: NTIMID8
Looking to see if anyone has a stock cl file they are willing to share.
Thanks in Advance
Save yourself a ton of aggravation and google Can Bus Gauges etc.
You can get Clusters, Ind gauges, and even driver modules that do exactly what you are looking for.
...
---
look around for the 201X HD 6.0L truck Calibration/information.
yes
Especially for us that have been in this since day 1 with HPT with a large collection of Known Stock reference calibration files.
Its 100% normal with the Large TB. Just disable the code.
Better spend time and look at the ECM version and OS mismatch you are creating before your locked out......
Also, if you decide to kill the ECM, select program and replace module first and it...
ITV24s are a heat range of 8 and more than cold enough. Tuning 101, to much spark and probably to lean. And I would dump the ms109, no need to add the sensitivity of oxygenated fuel into the mix.
Its doing exactly what you are commanding it to do. As it travels up in Rpm the cyl air mass drops into the higher spark portion of your spark tables (Less than .84 G/cyl sec).
Looking at the flow...
The difference was negligible
Relocate the ground from the driver side inner fender lip. I think I moved it to the firewall last time I seen this.
Manually adjust the VSS tire Revs per. Its usually +/- 3%.
GM TIS flash back to real stock
The PFI is controlled by a piggy back controller (E99)
Losing crank sensor signal and gets knocked out of sync
Read Sticky
How about just stock replacement case shells to replace our old worn and tattered interfaces.
Good chance its losing crank sensor sync at high rpm. Check the sensor gap to trigger wheel as well as the centerline position of the reluctor wheel to the center of the sensor. Quick and easy way it...
Save your time chasing the straightner, its a little better but still sucks
Request: Can we please get the option to master enable/disable the "override parameter's" option please
Still seeing "blue screen" crashes Running W7 Machine, anytime the Scanner is left open (Not scanning) and it goes into or put into sleep mod It blue screen crashes.
If memory server me the error...
Looking to know how to or Request the ability to add "Blank" channels to the Charts display. I know we can move them up or down which I use to breakup blocks or groups of channels but I can not seem...
If you are using a true GMPP control calibration, a TON of stuff is disabled/non functional.
Not that it matters much, but its actually the Chassis Control Module (K38)
Andrew, We have not found a workaround other than pulling the controller's from the valves, plugging them in and zip...