Search:

Thanks I appreciate the help. Will try it out. :worship:

Its an auto 4L60

ok I have the original stock tune file from my PCM I will compare when I get home. wanted to ask about the 02 f body stock tune, when I get one I can just write entire and it will work on my PCM? My...

First thanks for the response, the injectors are ls2 33lb the fuel system has a regulator set at 58lb with return. The ECM is out of a 2000 truck that I had laying around so that what I used are you...

Any info or ideas on what it can be? The car flares up without throttle and quickly dies have good fuel pressure and will be changing plugs after work. The codes im getting currently are P0121 TPS...

Need help - cant get this car to start up without throttle once it's up to temp the car starts fine. I can rev up and put in gear and stays running. I have looked thru the forums to get info and...

just did injector job on my 04 LB7 duramax and want to log the pass balance on injectors and the #4 cyl is missing from the channel selector can some one help with this thanks Art.

I'm having the same issues can some one enplane the steps on fixing the problem thanks Arthur

I was out playing around last night and did like four wide open throttle pulls and when i was done I noticed that it was stuck in high gear . Just looking for some advice on trouble shooting. I have...

thanks

still don't understand how to set up injector duty cycle please help

thanks Dave for the info:worship:

Thanks for the reply I will check it out.

​Need some help Guy's I installed ls9 injectors part# 81887 in my ls2 vett and wanted to clarify what the IFR is on this injector @ 58psi? Ive been surching through the forum and have found diffrint...

Ok guys it worked the tranny locks up now and it bucks and surges while it's locked up, I get one thing fixed and another problem shows up lol.

Ok I will try it out thanks.

Just given an update with the P0300 misfire. I changed the code to no error report and I still get the blinking engine light it just doesn't stay on and the trans still doesn't lock up so I guess I...

ok I will try it out change the P0300 to no error reported and see if the trans will lock up thanks for the replies. will keep y'all updated.

mowton I thought that i needed to adjust the tables under engine diag > Misfire > revolution mode normal and Cylinder Mode Idle (not Moving) and Normal tabs, reason being it stops the trans from...

Looking to see if somebody can give me a hand, I installed a 438ci with LS3 mast heads and a big cam in a 06 C6 with 6l80e and now I'm getting a P0300 misfire code. I read that the misfire code is...

I have a S/D 3 bar tune on my car And it used 3 credits, it's a 99 ss Camaro. I look at my license info and it shows it used the 3 credits twice for the same car Vehicle ID. how do i get those...

Need help setting up config for boost, I have a 3bar SD tune and i want to be able to log the boost, I looked at the sticky's to see how to change the map to 3bar and couldn't find it my car makes up...

I will look at the tune and check it out, thanks for the info.

wondering if any body else has experienced the problem I'm having with my a/c? It's a new compressor and dryer by the way and it does have the right amount of Freon just charged it yesterday. the...