I was trying to use existing wiring in the car to pass it through the firewall and I?m guessing that was the issue. I ran 2 new wires and now I have communication I?m thinking maybe the pcm might...
Type: Posts; User: William1991
I was trying to use existing wiring in the car to pass it through the firewall and I?m guessing that was the issue. I ran 2 new wires and now I have communication I?m thinking maybe the pcm might...
I?m getting a code u0101 now that?s the only concerning code
I finally figured it out I tried to use existing wiring to get it inside the car and there was too much resistance on the wires I ran it on two new wires and I have communication now I have a bunch...
Thank you
I have 60 ohms at the dlc when I unplug both the ecm I have 120 ohms the only data wires coming form the modules is the tan and tan/black both of the modules are from a 2007 Saturn sky base with an...
I?m just using the ecm and transmission control module they are already wired in the factory harness I just added a 120 ohm resistor at the dlc I have 60 ohms resistance at the connector and I have...
I swapped an le5 out of a Saturn sky with the 5l40e into my car I have power and ground connected to the dlc connector and the tan and tan/black wires connected to pins 6 and 14 with a 120 ohm...