Sorry I think I'm thinking of enrichment rate. I think I just zeroed out the delay field just because.
Type: Posts; User: thahemp
Sorry I think I'm thinking of enrichment rate. I think I just zeroed out the delay field just because.
My E38 didn't require much attention to get the idle right after the cam. I found the low number in Airflow Final Minimum where the idle started to fall apart, then found the high end where I got the...
IIRC the PE Delay RPM doesn't delay PE until it gets to that RPM, it allows a short delay if the RPMs are below that RPM. If you look at a WOT log with a PE delay, you'll see a delay before the AFR...
There are configs floating around here for logging. Do your logging, then multiply by half the STFT % error average into the MAF table. Repeat as neccessary. Make sure you have DFCO, COT, and dynamic...
Nevermind I figured it out. You can't use HPT to massage the virtual table from EQ<>VE if you have an E38 tune open. I had to open up the E40 sample tune and use the low altd table from there to do...
In everything I have read about SD tuning the E38, the VE low altd table is always RPM vs. MAP. Is there something I missed? Mine is RPM vs. TPS. I'm going to switch to EQ<>VE 4 and use it to modify...