HTH :)
http://www.2shared.com/file/h3TO5dg-/34_PULLEY_63_INJ_62011_WB.html
Type: Posts; User: dlclarkiiRegal
HTH :)
http://www.2shared.com/file/h3TO5dg-/34_PULLEY_63_INJ_62011_WB.html
I'm very satisfied with these results, I love the way the trans upshifts and downshifts specfic to my driving style and I want to share :yay:
My trans table. I used a 2005 GTP Stock bin as a base...
My AFR WB is fluxating under one MAF cell, 9500 Hz (approx, it's all the same cell) and it's causing KR when it goes lean. I'm not sure how to address this problem when it's all under one MAF cell,...
I created two custom PIDs circled in red. When I export my scan to a cvs file those two custom PIDs do not show up in the cvs file? Any explanation and possible how to? :confused: Thanks.
...
Thanks for all the replies. :) Made a 1200 mile trip this weekend scanning, modifying, writing to the PCM several times and I got it running a-ok :D
I'm just going to run the 3.6 pulley :cool: ...
When ever I give the car more gas on the highway to pass this KR is always right at 3200 rpms :mad: The scans below show this KR is occuring in PE mode with an AFR wideband of 11.x so what gives,...
Thanks. :)
I'll richen up to 11.2. As far as the coils, not sure if they're the original coils on the car which are L36 coils and if they are the coils have the same mileage on the car which is...
I don't know how so many members can run a 3.4 and not see any KR with just rockers or a cam and no I/C? Granted I have a GenV.
My mods are L32 GenV, XP cam, PLX WB, TOGs, FWI, 2.5" catback...
Installation was simple :cool:
Just follow these two posts like I did:
http://www.hptuners.com/forum/showthread.php?t=22967&highlight=plx
http://www.hptuners.com/forum/showthread.php?t=15247
...
Thank you. I upsized to a 3.6 pulley and I'm still seeing +3* of KR in 3rd gear at WOT around 110-120 so I think you're right about the stock injectors being maxed out. I'll probably get 65# so I...
I appreciate your time to look at my bin. I have a Ractronix fuel pump with the re-wire from PRJs performance. A wideband will be a soon purchase. Thanks.
For my 3800, boost doesn't occur until 0.32 g/cyl so I would only add timing for MPG from 0.08 to 0.28 g/cyl. You need to scan and find out at what g/cyl you see a MAP of 100kpa or higher. HTH.
This is for the 3800 W-body. Everytime I do a WOT run to the edge of the speedo, I see no KR in 1st, minimum KR in 2nd, and a butt load of KR in 3rd gear. :banghead: How do you tune out this KR for...
Fill up on 93 octane, scan, if no KR, add some more degrees of timing to the high spark timing table. Ideally you want 26* of WOT timing on a NA 3800. My opinion though, 93 octance is a waste of...
Thank you for the responses, I guess I'll need to save up for a wideband. :cool:
Trying to understand what you do here. I'm not seeing any KR running through first and second gear with reasonable timing. My tune is as good as I can get it without a wideband. I know I'm playing...
Ahhhh, I see said the blind man. I compared it to mine. I had forgotten how many codes were in there. I had only modified that once before years ago when I T/O my rear O2 sensor.
So WTF is up with...
Yea, that site has some hold/review process for files apparently, seems to be working now...
Anyway, I've attached the bin here as well.
Thanks in advance for your effort!
Well, here it is. I've up loaded the file. If anyone who can look at this and tell if it is locked (by DHP) or not, I would appreciate it.
Thanks in advance.
Link to Bin file in question -->...
Well, I did do a successful read and save/as on his current bin (I guess that's a good sign).
Like I said though, I'm wondering what will happen if I try to write to it. I'm willing to try if there...
I’m looking for an answer or advise just to play it safe. I have some extra credits a buddy of mine would like to buy 2 of them to make some changes to his Grand Prix GTP PCM. The PCM is apparently...
It's mind boggling with the amount of data I have access to in the 3.5MB G6 compared to my 512Kb Regal bin. :confused: But the HP Tuners definetly help eliminate allot of the lag associated with the...
No I didn't, stock is probably high 14s. I could have tried a stock tune at the track that night but it's such a PITA having to upload a 3.5MB file. Also this is a new car under warranty and I get...
14.3s @ 97 mph for my G6, stock with an HP tune :yay:
I tuned my G6 GTP with the 3.6VVT and holy cow! :worship: What a wake up. Solid 14s for sure :yay: My edited bin is in the repository.