I have an 07 Solstice GXP, I am trying to tune for the best MPG. What is best in terms of the variable valve time tables? For the intake and exhaust cam to be advanced or retarded and to what extent?...
Type: Posts; User: PyroMechanic
I have an 07 Solstice GXP, I am trying to tune for the best MPG. What is best in terms of the variable valve time tables? For the intake and exhaust cam to be advanced or retarded and to what extent?...
Fixed my knock issues using the injection angles. I do get some fake knoc from the balance shaft delete, although. I wish i didnt delete those damn things.
Alright, anyone have any idea how much a Dodge dealership should charge to get this done?
I checked to see what the settings were on the PCM that is on the car right now that runs and it is SKIM's disabled, but SKIM system capable enabled. I have tried different combinations of each...
We did not change the VIN. I went into HP tuners and turned SKIM settings to disabled, and it still didn't work. And yes, the red dot is lit, I even asked my brother about the dot, he didn't know...
60686
60687
60688
The reread is the last tune that I reread from the PCM after it didn't want to crank, thinking maybe HPT wrote to the pcm wrong and it may show an error, it didn't.
The...
Quick searches on the SKIS for the srt4 brought up hope for the pcm. It sounds like something that may be happening, however I am still unsure why it wouldn't have done the no start from the first...
Thanks for the replies guys. I will load up the tunes I was using on the new pcm. And honestly I would guess it would be something stupid simple too, since I can still log. But it doesn't make sense...
And also, the original NGC3 pcm, yes the 03 pcm was NGC3, I originally was going to tune. We unlocked it and paid for it to be unlocked, logged and read the pcm fine, but hptuners says it fails to...
Hey guys, tuning my brother's car, a 2003 Dodge Neon Srt-4. Has the NGC3 2005 pcm in it. So I began logging and got the car running, then after maybe the 5th write to the PCM the engine would not...
Did you end up getting this data? I need it as well.
I took my valve cover off today to check the lifters, cranked it over without spark or fuel and all valves open and close. Everything is clean. I also removed the phenolic spacer, intake temps are...
Its there, its the 80e85fps.hpt. And it has always been bad. When I got it stock it was alright, still bogged after coastdown but then settled. I have the phenolic spacer and im thinking about...
Hey guys, I don't come on here often but I thought I might try to get some help from the more knowledgeable. Long list of mods on the 06 redline, and to cut it short, it wont idle. Anything I do, and...
Im going to go back on gas when I have an empty tank. Nothing is working and my car is going to be so fucked up. I see 10-12* of knock at idle and it dies to 200 rpm, or sometimes stalls. This is...
I did what overboost said, and I found that fuse 39 links with fuse 47. If one is unplugged, that one has power on both prongs. If both are removed, only power on one of the prongs on each, like...
How much did those run you? What do they look like?
Idk if I should remove the mounts now.. I don't want to go through the hassle of removing the mounts and then find out that that was not the problem and then have to install them all over again.
You have full Bwoody mounts? ZZP's are much less restrictive, the diameter of the rubber inserts is smaller, and it even says on their site that they use "rubber" not polyurethane. The Bwoody mounts,...
Alright, besides removing the mounts that I will try in a few days, I guess everyone says I need injector tuning. Fyi though, I have never, and never learned about tuning the injectors. I know what...
Yeah, I did something similar to that, I still need to tweak it. Idle doesn't seem too bad anymore, just the knock is ridiculous.
Back to the knock because of the solid motor mounts though.. Maybe...
That's what Im saying! And that's a good thought about the the solid mounts, Ive actually thought about that before. Althoughhhh, I don't have my Bwoody engine mount on right now, the bolt for it...
I had my negative on the valve cover. Tested both prongs individually by removing the fuse and touching each with the positive side of the multimeter. Power on both sides. If I keep the fuse removed,...
Alright so the same day I picked up the BKR7E plugs. Went home removed my BKR8EIX plugs and they were gapped to .032. I don't remember that lol. The BKR7E that I was putting in were pregapped all to...
Oh wow, I never knew that. I thought heat ranges simply gave a better burn, and wont cause blowout. So which plug will be best for my mods? Pre detonation can be prohibited with reducing timing, and...