The abuse mode under the transmission tab only? circled below?
I did not see an abuse mode under the ecm engine tables.
Type: Posts; User: STR8BALLN
The abuse mode under the transmission tab only? circled below?
I did not see an abuse mode under the ecm engine tables.
ECM E38
TCM T42
They used a e38 engine os for the ecm
used a different os in order to use a 4l80e
Problem is I thought I deleted all torque management, but notice the etc is acting weird and...
I took a file from the same year truck, same computer E92 that had a 6.2. and compared it to the 5.3 and it showed a segment swap was allowed. It was not greyed out like it was not possible like...
Did an engine swap 5.3 to 6.2 2016 Sierra.
Can I just do a segment swap?
If so just segment swap the engine diagnostics and engine operation?
I noticed some of the DTC codes are non report for...
Tell me if I am right or wrong.
1. I can still buy credits for the MPVI1 Pro and tune with it?
2. As of now, you cannot add a wideband to the MPVI2 because we are waiting for the expander hub...
So does rpm / means (the rpm divided by a certain number)? Because I see when I input 4000 and use rpm unit and change the unit of measurement to rpm / the 4000 changes to 4.
My question is...
I searched to try to find the unit of measurments but I could not find it.
On a 2000 Silverado P01 controller, under Airflow>Dynamic> High RPM Disable
I noticed it has units of measurement of...
If the ETC-tip in tq management is set to disable, the ECM should not reference this table right?
I left the (electronic throttle / desired throttle / driver demand maps...) all stock.
The crazy thing is it does not do it all the time. It went 7 days without doing it, then it started doing...
No DTC codes
The truck pedal does not work sometimes when taking off in first gear. When you try to take off, the pedal does not work, you can press it to the floor and the truck will not move, no rev, no...
O2's will not switch. The guy had Bosch's at first, we swapped them out for Denso's. When you start the car, they stay around 400's. Once the car warms up they will go to 500's. Then if you...
Yes its the front O2's. Just trying to see the reason to do this.
Is there any reason or benefit to changing the O2 rich/lean threshold:
stock:
min rich/lean: 300 mv
max rich/lean: 650 mv
New seen in a previous tune:
min rich/lean:450 mv
max...
Like this?
I ended up setting up both Lambda and AFR. I just wanted to see how to set it up in AFR as well. Lambda was pretty straight forward as it had the predefined Eq ratio math already done. Thanks...
I found the user defined math parameter tables.
65871
Now is this the proper way to set it up?
Ok Mowton, I am posting this up to see if I set it up correctly.
I went into the new variable wizard and selected afr commanded. Then input the math function.
65868
Is this correct?
Thanks everybody, I think we are good to go. I hope this helps someone else too down the road.
Should I leave the min pulsewidth 0 at 0 rpm or should I make that .125 as well?
65862
Thank you
Thanks for the help. I found it (volts / 10.417 + 0.62) I will test it tomorrow.
So now I need to have my EQratio commanded vs AFR error(which is now in lambda) ?
Ok looks like I can change the settings so Lambda can be read.
I just read some one said to set up a custom pid for (custom PID "True Commanded AFR" - Commanded AFR * .5) Not sure how to set this up in 3.2 channels? Since thay are called channels now vs pids....
I just read some one said to set up a custom pid for (custom PID "True Commanded AFR" - Commanded AFR * .5) Not sure how to set this up in 3.2 channels? Since thay are called channels now vs pids....