Torque app can only read the ECM also, and it can read the following:
224051(front left)
224052(front right)
224053(right rear)
224054(left rear)
We just need to know how to get the hex...
Type: Posts; User: mdenz3
Torque app can only read the ECM also, and it can read the following:
224051(front left)
224052(front right)
224053(right rear)
224054(left rear)
We just need to know how to get the hex...
I checked the plugs and they all looked good.
I'm leaning away from a coil as the PCm never nailed it down to one or two cylinders, the ICM however could be the culprit, I try swapping it out...
I was at Daytona this past weekend running my 3.8 Camaro.
It ran perfect for the first three sessions on Saturday, but on the second to last session on Sunday it was way down on power at times,...
Does it lose the memory if it is unplugged from power before you read out the logs?
1997 Camaro 3.8L
I followed the instructions verbatim, but whenever I go to read the logs out, there is nothing.
The record light was on, no error light, I stopped it with the stop button.
Your engine only got to 91F. It will need to get to full operating temperature before you can really tell if the O2s are working well.
I had a friend of my with Hp tuners do a quick tune for me back when I built my car, but he had no wide band to work with, so was never expected to be perfect.
Back ground on the car:
1997...
I think it was the V6 timing fix that slowed it down. I took it back out and it seems fine now.
There are some other options in the PCM of my car that I could adjust (and would very much like to) with Tinytuner, but I can't because I can't get a .bin file from HP Tuners.
It was working fine, but it suddenly went to scanning 4 frames, then pausing, 4 frames then pausing, etc.
I didn't add any new PIDs. I've tried rebooting everything.
Any ideas?