Thanks. Let me know when you've got it out and I'll see if he still needs it. Just shoot me a pm on here.
Chris
Type: Posts; User: srtklr
Thanks. Let me know when you've got it out and I'll see if he still needs it. Just shoot me a pm on here.
Chris
Ah I see. Thanks for the response Jeff. Guess the hunt continues lol.
Jeff, wondering if you would be willing to sell your 98 pcm if you still have it. Ive got a buddy trying to finish up a transplant project and hes needing a 98 pcm.
thanks
Chris
Awsome! That makes perfect sense. Thanks for the response. Cant believe I didnt pay attention to that table. Now I guess the question is could that induce a funky surge/trailer hitching when in...
Ive been fighting a slight surging problem when slowing down completely off the throttle for months now. It usually starts just under 50mph and gets worse until the converter unlocks at 40.
At...
Id like to know a little more about this also. Like Todd said, Ive searched and cant really find much info about it. Ive got mine set off a recomendation to some one else from some one else with a...
Red, mine would buck pretty good when it went into lockup at low speed/rpm. I had got the final idle airflow min pretty good in the idle, 800-1000 range but hadnt touched the higher rpm ranges. I...
Heres my tune guys. My trims arent exactly where id like them right now. Around -5 or so in the cruising range so im gonna work on that a little more tomorrow. Overall tho I have zero issues. I...
Ive got that same cam in my 06 GTO. After a cuople weeks of tinkering ive got it pretty much dialed in as far as starting/idling and drivability. I have zero hot start problems and no stalling...
I'm about at the limit of adding to the min airflow table. In playing with the car some more, im noticing its really related to a hot start issue. If I have a heat soaked hot start it kinda chugs...
My cam specs are 232 234 112. Basicaly a HPE C-cam or a Texas speed torquer V2. After I rescaled my maf im getting some minor trouble when going from park to drive after a hot start. Once you put...
I would try adding 1 g/sec to idle airflow min in the 800 and 1000 columns and see if that helps clear up the idle any. Also would add 1 g/sec to startup airflow in the operating temps that are...
Did a little more playing around with this. Car is now running in sd for ve tuning. Got the ve table pretty decent at low rpms. Mostly -3 and less. Still have -5 in idle cell tho. The stalling...
I finaly installed a comp 281 today in my 06 GTO and for the most part things are going pretty good. Got the idle pretty decent. Got it to hot start. Drivability is really good considering. Ive...