Search:

Type: Posts; User: homebuilt

Search: Search took 0.00 seconds.

  1. Along the same 3 bar setup line (scanner), I...

    Along the same 3 bar setup line (scanner), I followed the help file directions, I don't have a boost PID or anything and the histograms were stopping at 105 lap. I figured out how to get it to work...
  2. Very helpful. Thank you.

    Very helpful. Thank you.
  3. Thank you. If the MAF is failed then wouldn't...

    Thank you.

    If the MAF is failed then wouldn't this cause the VCM to default to the low octane spark table?

    One of the features mentioned with the 3 bar SD OS was that it kept that functionality.
  4. I'm sorry. Perhaps I didn't word my question...

    I'm sorry. Perhaps I didn't word my question very well. I understand the two ways to force a normal operating system tune to operate in speed density mode.

    My question is: With 3 bar speed...
  5. So no matter what, the SD OS ignores the MAF...

    So no matter what, the SD OS ignores the MAF tables?

    For steady state VE tuning with this SD OS is it still beneficial to lock-out steady state to avoid transient fuel modifiers from being used?
    ...
  6. Thank you for the link. This is a nice handy...

    Thank you for the link. This is a nice handy site which I had not run across before. However I read through everything and didn't find anything I didn't already know. My question is specific to...
  7. My car will be running again in a few days. If...

    My car will be running again in a few days. If no one knows the answers to my questions I could also do some trial and error tests to see how the VCM is using the MAF and spark tables.

    Another...
  8. 3 bar SD OS MAF fail setup and octane table behavior

    Hello,

    Does anyone know how to setup the 3 bar SD OS with regards to the MAF fields?

    I don't have a MAF sensor physically installed and I don't know if you are to still set the MAF to fail...
Results 1 to 8 of 8