Thanks, I?ll try 91 oct and se if it reduces kr, then I can pull some degrees off timing in the 2k range
Type: Posts; User: einarak
Thanks, I?ll try 91 oct and se if it reduces kr, then I can pull some degrees off timing in the 2k range
I have a 2002 Escalade, as close to stock as it gets, only mod is a true dual 2.75" exhaust and a 25hp tune from well known handheld brand.
It is sometimes knock retarding madly around 2k under...
of course I forgot to put it up with the log file, i have edited my earlier post :cool:
here is one log from jonasje car showing the backfire with more pids logged, 47941
New cam sensor was innstalled and it fired up right away. So it is confirmed that swapping connections on maf and cam sensor is deadly for the cam sensor. The ecm and tcm was sent to psi to have them...
psi conversions harness, motor is 2008 but I think the trans is 2009 (at least its older than 2010 that is for sure). Both Vats been disabled, starter check and starter diagn disabled, all grounds...
I´m having trouble with a 2008 LY6 swap, E38 controller, after market wiring.
I get no spark, and no injector pulse.
Could it be because of a broken cam sensor? At first when the wiring was...
Lets bump this thread a little, and finally with some results!
I went ahead and followed the french instructions mentioned earlier in this thread to build this circuit, and it works like a charm!...
Who sells custom HPtunes for Duramax trucks? I have a 2007 Silverado that needs tuning, but no one in my country seems to have the knowledge to do it, and I dont have the time to dig into it at the...
Thank you guys! This was just it, the speed limit. Its incredible how such an obvious thing can get past you when things dont work out as the should. :yay:
I recently swapped a LQ9 from 2005 GMC Sierra HO with 4l65 to a Suzuki SJ.
Modified the original harness.
It is a DBW setup, all parts came from donor car.
Car runs great, except for WOT, it...
No T42, transmission is connected directly to the ecm
Has no one done it before?
Would it be a bad idea to wire up the "performance" switch to J1-71 and alter the table for performance mode to engage the TCC at all times in 2, 3 and 4th gear (no...
I have a LQ9 with a 4l65e transmission from a 2005 GMC Sierra which I´m installing in to a Suzuki truck, Is it possible to wire a switch to the pcm to engage the torque clutch converter manually?...
I´m about to tune a 2007 duramax truck for a friend, I´ve forgot how the licensing works.
I know I have to buy licence (2 credits?) for the stock tune.
But if I want to test any of the files...
I´m having some pollution issues in my 02 LS-1 powered Nissan Patrol. I need to get it lower to get it legal. The laws ask for max 0.02co reading at idle, but I got 0.09. Cats and smog pump have...