Yes, I do understand the VCT Schedule Mode better now, but not fully. I went for a test drive today and found (like you said) during decel and idle, Optimum Stability was used. During normal...
Type: Posts; User: G_Force
Yes, I do understand the VCT Schedule Mode better now, but not fully. I went for a test drive today and found (like you said) during decel and idle, Optimum Stability was used. During normal...
Thank you, all!
Thanks for the added detail. I forgot to mention that this 6.2L V8 has a SOHC valvetrain setup, so the cam phaser affects both intake and exhaust valves the same. So I would agree that trying to...
This is good! That's what I kind of thought how it works. Thanks!
Thank you. Very well stated! I have done CAD work before, so I do understand the association with respect to Snap to Point and Snap to Line.
The Distance Tables now make sense to me, thanks to...
I am presently tuning a 2014 Raptor 6.2(6) and know how to tune the spark and fuel, but the VCT/VVT tuning is a mystery to me!
I can't seem to find anything that truly explains how Ford VCT actually...
Just as a follow-up ...
I left the Clutch Fill Time set to 0.4 Sec's for the 3->4 shift. But, I thought it couldn't hurt to bump up the Max Line Pressure from the factory set value of 150, to 175...
Thanks for your input!
Thanks, Bill. Does it help at all to reduce the Clutch Fill Time for the 3->4 shift?
I'm working on a 2010 Raptor with the 6.2 upgraded with an ATI ProCharger. The 6R80 trans shifts fine in all gears except the 3->4 shift. The shift is commanded and by the time the shift fully...
I have worked on GM ECMs and PCMs for over 20 years and disabling VATS is a procedure that is accomplished quickly with 100% certainty. Now that I am working on Dodge PCMs in Jeeps, I am amazed at...
I did examine the wiring diagrams and ECM pinouts to determine that the 2007 truck and the 2012 Vette don't have a Fuel Pressure Sensor, but I was still wondering if it was derived from another...
As far as the Fuel Tank Pressure Sensor goes, I fully agree that it is an emissions compliant component and a Low Pressure device, like only a couple of pounds of pressure, I think. I knew that I...
While tuning a 2007 Avalanche with the 5.3 LC9 and Magnacharger and a BIG Comp LSR cam, I needed to make a few adjustments to the Injector Delta Pressure table. So I added the PID's for "Inj Delta...
How close are we getting to Ford Diesel support? I've got a 2005 F-250 SD, 6.0(P) PS, w/ 5R110W trans that needs transmission tuning besides the normal engine tuning. It has the 12A650 ECM. I can...
I've got 2 Dodge customer vehicles I am currently ready to tune right now with HP Tuners. Any hope for coverage on a 2001 Durango 4x4 w/ 4.7(N) Magnum V8, Auto, and an early 2004 Ram 5.9(C) HO...
12615136 is indeed the 2-bar MAP sensor which supersedes 12580698. I just spoke with GM about this last week and they confirmed that 12615136 is the new P/N.
Sincerely,
DJ