Hi,
I need help to lower the idle when startup cold. Idle is about 2200rpm for 15s after startup.
The tune is a SCT flash. Tune and scan is attached.
Stock Engine with openair filter.
...
Type: Posts; User: LunTec
Hi,
I need help to lower the idle when startup cold. Idle is about 2200rpm for 15s after startup.
The tune is a SCT flash. Tune and scan is attached.
Stock Engine with openair filter.
...
Yes the Wheel TQ fix that issue.
Now next problem.
When I cruzing with the car in normal speed it start run realy bad after a while, I can see in the scanner that STFT start to lean -28% on...
Ok will try that! Thanks a lot!
Thanks!
When I tune it in my dynapack there was no problem, but as soon I go and test it on street the wrench key start to light.
It´s the first Ford I tune.
Do I have to make some changes in the...
Haha there it was just in front of me, x3600, now it looks good. Thanks again Eric! I will never ask that question again:)
Ok thanks Eric!
But I still don´t get the Flow rate Low/High for the Siemens 80lbs injectors.... Do I have to calculate to get this numbers? Below is the numbers I´m talking about but I need...
I looking for Flow Rate Low and High for Siemens 80lbs injectors, all other data I found at the first page on this thread. Thanks