I changed most values in those tables from about 1200 rpm and up to 10. It seemed to quiet down the popping more I think... I thought about increasing to 11 and see what it would do
Type: Posts; User: the_w
I changed most values in those tables from about 1200 rpm and up to 10. It seemed to quiet down the popping more I think... I thought about increasing to 11 and see what it would do
So I was looking there is a blending and a threshold. From the looks I need to change the threshold? Also on the active spark tables there is a A and B, they need to be the same?
I appreciate it! I will make the change and see how it reacts.
I have a 2000 silverado that is manual with true duals, long tubes, spintech mufflers, and no cats. The poppping is horrible and I am not one that likes it. I tried to change couple minor values and...
Thanks for the reply, I will give that a try and see how it runs. If I have problems at that point still I may upload my tune to get further opinions.
I swapped a t56 from a 2005 GTO into my 2000 silverado 6.0. Needing to fine tune it. From what i have read I need to disable some DTC's, probably up my idle desired airflow, disable PRND, change the...
thank you sir!
When i am tuning my spark advance, in my scanner I want to monitor the correct knock so that i can back off timing in that particular cell. What are the steps to set this up in the scanner? Can i...
thanks guys. Thats good information on granular specifics of AFR. I have my VE table dialed in decent but could use more work. So I moved on to the maf curve.
I am trying to dial in my maf. I have one histogram logging maf vs stft. The parameter for my stft is a custom math to get the average of both banks. I have my wideband setup and logging correctly,...
It was unplugged before i started up my truck and started logging. But yes this log is junk because I need to log ltft as well. This was my first stab at it, so adjusting as go. Thanks for the input...
Ok I did more reading, finally got everything setup to get some data logging I hope it wasnt a waste. This is only stft there is no wideband yet, starting small and working my way up. I have a...
Here you go, maybe this will help
I dont want to eve drop on this thread. But I have a 2000 silverado swapped a 4.3 to a 6.0. But I will say I have ls3 heads, intake, and custom cam. Not sure if my tune will help, my VE table is...
yea i was going to do some data logging last weekend but it was windy here in texas so I held off. I plan on doing it this weekend if weather holds ups. In mean time i was doing some searching on a...
I know you ask for the config and log files but I do not have those yet as I just got the software to pull my tunes from the previouse guy that didnt do a good job. I can give you all the specs of my...
I am recently new to this forum tried to read everything so I dont post in wrong spot. But I would like to upload my tune to have someone give it a look from a high level. Truck runs decent but I...
So been having my local tuner guy tune my project truck as I build it. Made significant mods to it over years paid him money and gains were very eh... the latest mods were ported ls3 heads, ls3...