Thanks for clearing that up Bill.
Type: Posts; User: deepblack ss
Thanks for clearing that up Bill.
I've been searching and i've gotten some mixed messages on this. Will the 1 Bar SD OS completely ignore the MAF without failing it, or does the MAF still need to be failed by setting P0103/2?
...
Wow, this thread got big since I last checked it. In case anyone is still wondering the solution to my issue what to raise the idle to about 950rps, with the 80s it doesnt seem to be able to idle...
New observation, idle timing is perfect while warming up but then drops to 0-2 when warm.
I believe the P0068 suggests that either your map or your baro sensor are bad.
before the E my idle spark was stock. so 10 or like 19 depending on what table it was looking at. No idea where 0 is coming from.
OK, the issues in the OP have been pretty much worked out. The only issue/question I have is what could be causing me to log 0 degrees advance at idle. both my idle spark base and main spark are...
Just converted to E85, It pulls hard but I have a few issues.
1. When the car enters PE I get a pretty decent jerk.
2. The idle seems a little finicky. Some of the time its fine, and other...
The expected economy would be about 20 if you were getting 28 before. The extra power is probably just making you put your foot down a bit more than usual lol.
Thanks for all your help roderick ; )
For some reason it doesn't load all the parameters for the default histograms. I'm just trying to avoid a little work and grab one from someone else. Maybe they became corrupted in some way?
Does anyone have a working default imperial config file for 2.23? All the histograms are messed up with my current configs now that I am running 2.23.
I'm not familiar with that anti-virus, but you could leave it disabled most of the time and only enable to run scans once in awhile. If your smart with downloads, viruses shouldn't really be an...
Going to be switching to e85 and was wondering if anyone could supply a method for adding in spark. Should I add spark everywhere? only certain parts of the table? If someone could outline a good...
Gonna be switching over to e85 within a few days here. The stoich value for e85 is easy to find, but I haven't been able to find a straight up answer for what to set for the PE afr. I saw .75 lambada...
Are they rated at 32# at 43.5psi or 58psi.
thanks