So was looking for info on scaling the map sensor on my car. 2.2 cobalt with a 4 bar map sensor in a zzp supercharger kit.....map sensor part number is 12612110. Thanks
Type: Posts; User: Sunburst_SS
So was looking for info on scaling the map sensor on my car. 2.2 cobalt with a 4 bar map sensor in a zzp supercharger kit.....map sensor part number is 12612110. Thanks
So I'm getting ready to supercharge my 2010 2.2.......I was looking for some settings for the 60 lb injectors, 4 bar map sensors. Also, does anyone have any experience with ve/sd tuning on these? I...
Installing a supercharger kit on my 2010 cobalt here shortly....it comes with 60's and a 4 bar map sensor. Does anyone have good injector and map sensor tables for this set up?
Ok cool, so keep the maf and correction tables as they are, and change the injector offset table by appx 15 to 20 percent across the board? Thanks man
It has the larger injectors in it, I set them up for that. Do I need a different offset? How do you calculate that? Thanks
Was looking into an E blend on an LNF. I know on the LSJ ecm you can change the stoich ratio in the program for whatever you want it to be. I didn't see an option there in the LNF. I know the LNF...
Quick question. I am going to upload a new file to an automatic g8. Never really worked on one before.....is it the same as any other vehicle. Read entire, edit and upload calibration only? ...
Thanks guys.......was the stupid jumper harness that was installed causing the p0101. Removed harness, and just pulled the factory wiring out of the loom and ran it down to the new location, problem...
having a similar issue, did a relocate......the car sets a p0100 and maf readings do not move.....stays at around 86 lb/min.....how did you get around it so it will at least not set that code and I...
relocated the MAF to the cold side charge pipe, going to tune the car and it keeps setting a p0100 and MAF values are staying at 88.86 lb/min.....not able to get data to make adjustments and get the...
Just wanted to get some input on going with an E85 set up......what changes need to be made before tuning starts? What afr is good at WOT?
email sent......let me know what is needed
so if I was to want to go with the stock tune file, would I just have to flash with a stock tune file like a normal flash, or a write entire? And what would need to be changed to make use of the new...
trying to get the right set up for MAF tuning. For some reason I can't get the MAF correction table to show up? Any help would be appreciated, thanks
oh ok....are there any additional tables to alter besides DAL to increase the boost level??
Going to be tuning a cobalt with GMS1.....anything different to do between that and a stock LNF?
Just curious if anyone is running 42 lb injectors on a 2.8 with meth? What are your IDC's like?
ok cool, thanks guys!
Just curious if the facotry wideband in the LNF is accurate enough to tune with, or do you guys use an aftermarket wideband??
I am getting into one of these also.....what injectors are you running? I think the kid put some 60 lb injectors into the one I need to tune. Seems like a big step up for the stock injector size in...
I have a turbo LSJ coming in with 80lb injectors.....does anyone have a good set up for the 80's to get me started? Thanks
having some trouble getting my drivers installed. It was working fine until I installed the beta 2.23 version of hpt. I attempted to download the new drivers again, unzip to my desktop.....went to...
Hey, just had a quick question....I have someone with a new camaro, has a supercharger and bolt ons. He just wanted the 420 and 430 codes turned off. Is the process the same on this as other...
awesome, is it the vesion available for download on the main page? Or do I have to request it?
Anyone???? I beleive it has the E67 pcm.....should be the same set up as the hummer h3 alpha.....