it would be cool to have a feature so can test the actual gauge cluster so I can set the settings
Type: Posts; User: MikeyZ
it would be cool to have a feature so can test the actual gauge cluster so I can set the settings
I need to do a segment swap for a 4l80e for a 2002 corvette is it possible to use a silverado 4l80e bin and simply copy over the engine details? Suppost seems to be a way for a few weeks
I need to do a segment swap for a 4l80e for a 2002 corvette is it possible to use a silverado 4l80e bin and simply copy over the engine details? Suppost seems to be a way for a few weeks
pull the efi fuse...
I have a quick question on knowing if my trans is slipping my question is if I take the trans input shaft rpm and divide by the output shaft rpm and that equals the correct calculated trans ratio I...
you have a datalog?
What bin files interchange with Pcms 09354896,09254896 is it possible to write entire a 2000 camaro tune? or any 2000 fbody tune? or truck tune?
looks like you possibly have a vacuum leak with you iac counts so hi
and if your aem gauge is accurate your not commanding 14.7 your actually at 12.5 ish
your o2 sensors seem to be either pegged at lean or rich...
looks like its super lean at about :35 then it starts adding fuel
What im asking is when they scan the computer for a smog check... can they tell that its been modified.
when you install a wide band in your stock narrowband location do you have to do each side? or will each side be the same afr
manometer? I ment a transmission pressure gauge in the test port
According to the astg guide you can only run a pressure test for 2 mins... according to sonnax you have to go for a test drive... Has anybody actually drove with a gauge on the test port?
How does tuning affect smog checks specially in california? I have deleted the a/c and also turned off vats And may be switching to bigger injectors to run e85 in the future does anybody Know if i...