I also have a problem with the scanner maxing out speed with the car stationary. T56 connected to an LS3 with a E38 ECU. What is also interesting though is that I have the speed output from the ECU...
Type: Posts; User: TTVYSS
I also have a problem with the scanner maxing out speed with the car stationary. T56 connected to an LS3 with a E38 ECU. What is also interesting though is that I have the speed output from the ECU...
all solved well sort of... just noticed the view was set in basic and not advanced. The parameters appear to be set ok so I still trying to understand why the speedo is maxed out when i run a scan....
please excuse my ignorance but I am trying to get my speedo working through the Cable X converter I am using. The LS3 and ECU came from an auto and I have a T56. The VSS sender is connected to the...
Ok noted and thanks. That was going to be my default option. I should be able to hook up a microswitch on the pedal assemby.
Hi
I just fitted an LS3 (E38 PCM) into a 67 Camaro with a TH400. Because I have a drive-by-wire throttle body I was thinking of hooking up the TH400 kick-down from the ECU using the aircon...
thanks - will have a look at this
2008 Clubsport R8 (Commodore)
Hi - I recently had a MAFless tune done on my LS3 and I have an slight but annoying flatspot on acceleration. Essentially it is a slight time delay from hitting the pedal to getting the response from...
Hi
I have completed a search but didn't locate a direct answer to my question. I have an LS3 M6 and understand I can effectively disable the torque management. If TM is designed to accommodate...
Excuse my ignorance but what do you mean by "tunerlocked"? Does this mean the tune has been intentionally locked by a tuner?
thanks
Hello again
I followed the HPT help instructions to set up new PID to display MAP in PSI. I chose the [SENS.30.IMP]-14.5 function and then logged a robust run afterwards. When analysing the log...
Thanks guys for the info. Much appreciated.
regards
2003 VY SS Commodore (LS1).
thanks
Hi
Completely new to tuning and hence probably asking a silly question. I used the scanner for the first time and noted no activity in the chart or table in relation to the knock sensor. I...