I'm running an E67 ECU in my turbo truck. Can I use the supercharger TM settings to setup fuel/spark cut for over boost or high IAT temps? Thanks
Type: Posts; User: Rhin0
I'm running an E67 ECU in my turbo truck. Can I use the supercharger TM settings to setup fuel/spark cut for over boost or high IAT temps? Thanks
Still having timing problems. Why is TM advance pulling timing? This is driving me crazy
Alright thanks. The timing dip is not at wot, just light throttle
Nobody can help me?
I'm having a light throttle hesitation after startup, only last for the first 5 min of driving then it goes away. Timing is going almost negative when this happens. I've logged all the advance/retard...
Great find! I've been having wot shift problems. I just put my gear and tire in a stock 80e tune file and the rev/mile is different than mine. I'm gonna try those numbers and see what happens
Hey guys finally got my trans to shift at WOT. It's shifting sooner than I'm commanding but i think i have bigger issues. The shift is solid but the log looks like it slipping after the shift? The...
nobody?
Any luck? I'm having the same problem
I've read a couple of write ups on this issue. I'm having no luck getting it figured out. Trans works great everywhere else accept WOT. This is a twin turbo Canyon lq9/4L80e.I think Im logging...
afr is between 14 and 15 while coasting. O2's are maybe 6" further down. It only surges while coasting to a stop. Idle is fine as soon as you stop. Build is: 6.0 lq9 converted to 58x twin BW s360's,...
Hey Guys. Just got my truck up and running. I've been driving and logging, having an idle surge issue while coasting to a stop. Once I come to a stop idle is fine. Been adding to the base running...
06 Canyon never had a FPCM
Just a FPCM code. The truck does'nt have a FPCM so I have it not fitted in the tune
Any idea why I'm getting the open loop fault? Most of what I have read says to tune VE in OL?
I can try that. I do have up stream 02s. I'll work on smoothing the VVE. I'm sure its going to need a lot of work in boost. Thanks for the reply
Let me start by saying I am very new to tuning. This is my first attampt at gen lV tuning. Just finishing up my Canyon 6.0 twin turbo swap. Working on idle tuning an VVE. Have not driven the truck...
54585 scan file. not sure if it is attached right or not
54584 06 silverado. Just went turbo switched injectors and over to Speed density. Won't idle, starts and dies cuts out when you give it throttle. My tuner sent me the tune file said it should...