May we request the log of the run. I would like to see the fuel mass for cyl 1.
Type: Posts; User: fumanchu182
May we request the log of the run. I would like to see the fuel mass for cyl 1.
this is exactly my issue, i made a support request and even supplied HP Tuners with a video of it. Hopefully they can fix the issue.
https://youtu.be/PlHmwrsR7o0
This issue has only been...
128295
Currently experiencing 100% unable to read logs from the device. I have tried uninstalling, re-installing VCM Suite beta and stable. Re-synced interface via Help menu. Re-synced Interface...
Can HP Tuners or a representative from the company comment on the safeguards of data privacy in the following scenarios:
1.) You take the emissions based course and we do not keep record of this...
I have a rebuilt transmission that is using a donor TCM from a 2019 Dodge Charger SRT Hellcat (LD, 05035608AC). When we placed the new transmission in the car it started no problem. When I went to...
So lets look at the IAT Hot Spark table (32124). Nothing special here it is RPM on X axis and Aircharge on Y axis. Then the individual cells represent amount of timing to be removed if the criteria...
I was having an issue with a Beta, updating to the newest revision allowed me to get those channels back. It just sucked that I had to wait for the latest revision.
Completely understand that...
Is there a directory listing on the website of beta versions? I recently submitted a ticket for a bug but can only download the latest version, I would like to go back to a revision that I was on...
If its 100 percent stock the ANN setup should have seen full boost without issue.
What year did the swap come from, when I did a comparison from a 2016 Challenger Hellcat Stock it matched 1:1? Do you have a log with data of a pull at wot?
I also checked your fuel sitation. The tuner has you programmed from 12.50 to 11.98 which is good as that is an acceptable range for Heads/Cam.
I looked at your WOT Spark table (44631) and it is potent. Your part throttle was not changed comparted to a 2006 5.7 R/T Stock read. There's not just one table you need to change. Tables that you...
Do you have the books? I have the books and have had a great experience with them.
Also not to leave you high and dry you did ask about firmer shifts. The place to research that is under Trans -> Shift Pressures -> General -> Fill Pressure 1.
Gear 2: b2, k1, k3
Gear 3: b2, k1,...
Here are some things I noticed in the tune, I am not your tuner and the ultimate responsibility is to hash it out with the tuner and get it right. If he is unwilling to help you then please use the...
That is correct. OG Hellcats don't get the cool features.
Unfortunately I don't do FB, sorry. If you would like to post the information up on the FB group that's fine with me.
That's what we wound up doing. I retrofited his HP70 tune to be more like a Demon HP90 tune and it was madness. In the end we just went with the HP90 calibration that we modified. Had to turn off...
Not trying to ressurect a dead thread but I figured I'd put the information out there. I made a bench harness last week. I documented all of it here:...
Attach a copy of your current tune please. I will look at the tune and recommend some changes to make.
112587
I think everything you will need is in the above image. He's making over a 1000 whp now so we adjusted it. :pray:
Ignore, realized after restarting VCM Editor I was in my 2015 car, found it. Engine -> General -> Power Mode....
So I've been in and out of a friends tune file trying to figure out how to update the UI to display his latest dyno numbers. Is it stored in the tune or is it something that HP tuners can update in...
Do you have any logs or data of the car at WOT?
Just checked all the PINS on my 2015 HC and did not see any pins that can be reused for that purpose.