Anyone? If i loaded the wrong log i will load whatever someone needs. We put a new converter in it and all was fine for a few days. Then all of a sudden slipping in every gear except 1st. Like when a...
Type: Posts; User: south_playaz_111
Anyone? If i loaded the wrong log i will load whatever someone needs. We put a new converter in it and all was fine for a few days. Then all of a sudden slipping in every gear except 1st. Like when a...
bare with me. I did the best job I could at getting the most data the only way I new how. my buddy and me put a factory torque converter in...all was fine for a few days except the shifting at WOT...
Yes! It worked. Thanks so much. 1 simple careless mistake on my part cause alot of problems! Thanks guys alot.
Ok wait let me try something, i deleted the licence file. Let me try it agian.
I did not reinstall the usb drivers tho. All i did was delete that file and reenter my app. key. Do i need to do both at the same time? I did check the drivers and they both say what they are...
I deleted that file in hp tuners settings folder. I then got my application key and re entered it. I then tryed it agian. Still the exjact same message. Have an idea on what you would like me to try...
My car is a 2007 cobalt ss/sc.
I am having this same problem and no one will help me. I have the 2.2 2version and i cannot connect. I know i connected with the 2.2.0 version. I cannot find the old file to download though. I have...
Anyone have an idea? i Really think its a software issue and i am unsure of what to do. I need to fix my tune since its getting colder down here.
Forgive me if im in the wrong, but i never said anything about having the scanner loaded while trying to read the vcm. If the cable says cannot read vcm that means the scanners not going to work...
error message is unable to connect to vcm. verify cable is connected and key is in RUN position. Thats it. I have power through my port and laptop. Like i said i had this problem when i upgraded and...
Hi. I had this problem once before when i downloaded a new version of hptuners. I just went back to the old version and all was fine. Im having the problem agian and noticed i have version 2.2. I...
Ok well im a retard. .08 is very light throttle correct? and then when you get in boost the cyclinder airmass goes up into the ones. Im trying to do this to fast and im doing careless mistakes. my...
Also i dont really under stand the way the timing tables are set up. There is high octance and low octane. I got that part. But when im in full boost my knock number apear in the cyclinder airmass-...
Bump. I am now logging knock. My scanner gauges doesn't read anywhere near what my histograms read. My advance in my guages screen reads way less then my advance in mine histrogram. Same with the...
Thank you so much for your help. How do you know i am knocking? i looked at the scanner the whole way through WOT and i saw 0 knock . Also timing never goes up it starts at like 13 and goes up to...
Hi, I finally got my a/f dialed in exjactly like i want. I am running gm stage 2 with a 2.8 pully. It runs 12.5 right when it enters boost and right around high 11's when i let off. I checked my...
Ok i thought that they couldn't be that close to the heat but i will do that! thanks. Oh yeah one more ?. Should i get my stock cat tooken out? i have the gm performance header and cat back. and i...
The cobalt website hasen't worked for me for a few days. I dont know if its my computer or if the server. I have my cobalt autometer wideband ready to be placed. Im supposed to place it before the...
I've spent hours with this thing and its running fine low end and top end! But i want it done the right way. The only way i can get more gas is if i up the ve offset and up the low and high rpm...
Sorry it took me a week to reply. Just got done with work. I am going to put it the correct constant and start from everything stock. So when i have the numbers highest on the low rpm and high tables...
mitsu 16G. Meth injec. Comp turbo cams, and forged internals thats about it. For 650cc injectors what should my constant be? My idle right now is 15.5 to 16 instead of the 14.7. If i put in the...
How are my tables way off? if im at 10.5 a/f thats is perfect! I do not ride in boost. Im trying 2 get my 100 % throttle correct. It idles perfect! If i put in the correct constant then i can't get...
Hi. Currently i am running a 2002 ecotec 5 speed cavalier. I am having problems with tuning. I have not been at 20 psi for long. At 15 psi a/f stayed very well. Now that i am at 20 it is a nice 10.5...
If he has a 2.6 with stock injectors how the heck is is INJ duty 68? somewhere figure that out. O yeah hey man if you got a slobalt cobaltss.net is your site to be on to do research if you didn't...