cant copy and paste anymore? the paste is greyed out ? Tried doing column by column, and into each cell as well and still not working?
Trying to copy force motor table into vcm editor. never had a...
Type: Posts; User: buktooth
cant copy and paste anymore? the paste is greyed out ? Tried doing column by column, and into each cell as well and still not working?
Trying to copy force motor table into vcm editor. never had a...
This solved my fan problem. I had fan#1 hooked up to low speed and I used the a/c clutch wire and a relay to provide ground for high speed fans . My fans were on low speed all the time, the pcm was...
what the f is going on with the gear wizard? Im trying to adjust the tire size as I just went from a 25.75 inch tire to a 25 inch tire. When i put the new tire size in and same gear ratio, the...
Thanks
nowhere to input tire size? Just updated hptuners but no place to input tire size. what happened to it ? It used to be in speedo, calibration , gear ratio and tire size. Only has an option to change...
Bingo! You are correct sir. Sorry for the late reply, but I found the problem just after my last post. When I made this harness for this ls1 swap I looked at the cruise wiring diag. which had +12v ...
Still there?
Thanks for the help! I see the error and I adjusted the shift tables you showed me in the first jpeg you posted, but Im lost on the second jpeg. Are you saying to disable all three max line dtc's,...
Can anyone help with this one? My tcc wont lock up . No codes present. I maxed out all misfire detection tables and no 1870 codes either. With the HPTuners scanner I can lock it up and it works and...
I was trying to download the trans config file from the ls1tuningguide.com, but I cant use it. How can you save it as a hpt cfg file so that I can open it with my hpt scanner?
Thanks.
VVT changes the LSA(lobe separation angle)or valve overlap period plain and simple.
Wider lsa eg 119 DEG= smooth idle, great low end torque, great emissions , reduces reversion due to less valve...