hi
1-copy 105 kpa from 400 rbm to 8000 rbm and past to 315 kpa
2-multiply 315kpa 3
3-interpolate between vertical bounds
i hope this will help you
Type: Posts; User: dodiibob
hi
1-copy 105 kpa from 400 rbm to 8000 rbm and past to 315 kpa
2-multiply 315kpa 3
3-interpolate between vertical bounds
i hope this will help you
What is the unit in Virtual torque tables newton meters (N-m) OR pounds foot (lb-ft)
you are right if it is maf but i think this program is mafles SD
In spark the high octane and low octane has to be same
thank you for your help
5FDP thanks
it is 12623671 3.3 MAP
to run 3 bar MAP with correct linear and offset settings with 3 bar os
what 3 bar map sensor you suggested part number or internet link pleas
abut the...
the problem is at wot it is not past the 3400 rpm
100% tps
10.5 timing
12.5 afr
150 kpa map
3.2 hp version
do you think that i miss some thing in tuning or is it normal for 4200 torque...
i have same problem with 3 bar
remove intake manifold absolut pressure (sae) from channels in vcm scanner and tray it i hope it is work
engine-spark-advance-main spark advance
copy your high octane to the low octane
it is unlocked check it now
38444
38445
38446
hi
this is my first tuninig and I like to make it sd all sd steps as it in hp healp the car is soo smoth and god drivebeliti but I have wot problem
1-the log main spark read 18 to 20 timing but...
hi
this is my first tuninig and I like to make it sd all sd steps as it in hp healp the car is soo smoth and god drivebeliti but I have wot problem
1-the log main spark read 18 to 20 timing but...