Search:

I did some custom programming for a datalogger.

I found some neat things while programming.

SOUND.

Example: Continuous tone on parameter (ie air fuel,boost,etc).

Example: Beep on...

i thought the trans temp was an SES feature? mines disabled oddly. Previously tuned by an ls1edit.

hmm.

can you just add a fake pid that does this computation for our lazy asses ;)

i'd like a copy too

There's a good thread on VE table on the ls1edit pcm forum.

The car must run in both MAP and MAF mode. I'm guessing it uses either or and both to calculate the ve. Since some cars come without a...

no idea. was dickin around, before it was 0 degrees on shifts, which sucked. I dont think i want full timing on shifts. i do have 71K on trans. Lockup i'll have to think about too...

hptuners said they will address this in the next version iirc.

Honestly i screwed around with tqmgmt a little and went from 6089 shift @30.5 -> 0 -> [email protected]

after playing a little

6600...

yeah im wondering. I have o2 extensions and they are 70.5K miles old. I was not sure if the headers did that (pace-suckahs) or if one of the o2's are going bad.
They both seem to sweep to the same...

ls1 edit can read hptuners files ;)

they have the option to lock your ecu. ask them. dont do business with tuners that do that. its your ecu.

ls1edit can read (but not write) hptuners bin files ;) yeah.

here's whats going on while therse some driveline lash in 3rd gear lockup. Any tips?


Engine RPM ,Vehicle Speed mph,IAC Steps ,Throttle Position % %,Ignition Timing Advance ,IAC Desired Steps...

im logging mass air flow of 1.67-1.75lb/min
idle air flow desired 1.087-1.106 lb/min
at 45mph 0% TPS (surging)
ignition 38-39 degrees
rpm ~1473
IAC steps /desired 88-92 (tracking well)
LTFT...

heh they legalized that "m" pill? liquified thc . hmm.

anyways i dont use drugs ;)

atlanta, ga . VW tuner, but needed a daily to rip into the 11's. Having previous tuning experience, it was...

bump i set commanded RPMS to 800rpm, in pn/in gear, yet when im letting the car cruise it seeks 1000-1200rpm, what do i need to change i did a .90% on throttle cracker didnt seem to make much...

Anyhoo i got a perfect 700rpm idle (112lsa A4), but my idle is still about 900-1000 (seems to idle higher than requested, is this cause i drilled the hole?) In gear i am still noticing a surge till...

sloppy would you mind posting your actual #'s changed.

looking forward!! :) If it works good i'll be all about the 99 add on for my bro to use!!

how bout some free 2 day ups action ;)

sam

chris are you saying that my 0 degree between wot shifts is because my ls1edit tuner didn't set the tq mgmt to 639??

i don't make 639 thats for damn sure.

tips on how to delete tq mgmt safely?...

how well does the scanner fair with key off/key on's.

like if i want to log and im staging and accidently (oops) stall the car, i don't want to hold up the line when i restart. same with cold/warm...

please make this a priority. one of the main reasons i ordered your package (hopefully soon it ships!) was to get rid of this 0 degrees on shifts. I go from 30.5 (6089) to 0 to 25.5 (4600).

Still...

even if markers in the file would be good
then a voice/camcorder with your buddy, you could say marker1 hit space and it would mark the file or start a new file

then next event say wot, then hit...

I got alot of bandwidth at work. ALOT. If folks wanted i could setup an account that would hopefully not be abused. to store tunes/maps/images.

Can we share them that way with your EULA/AUP?

or...

Neat thing bosch ecu's do is for all ram/rom writes they double store the info, and use two's complement on every read/write and fault the ecu if anything goes wrong. Very smart.

So you guys at...

is .5V normal idle stop ?

so for a 112lsa/cammed car what would be ideal IAC at startup,idle, and in gear (auto). Anyone know? That way i can figure out how to go about my target.

also my base TPS V is cracked open to .5v,...