Jeff Evans, of 'Evans Performance Academy' has some of the best, up to date, instruction for a very reasonable price. The videos are downloadable, so there is no need to be in constant wifi mode...
Type: Posts; User: Kittyboy
Jeff Evans, of 'Evans Performance Academy' has some of the best, up to date, instruction for a very reasonable price. The videos are downloadable, so there is no need to be in constant wifi mode...
The MAF will stop logging at roughly 86-87 lb/min of airflow registration. VE / SD based tables will stop logging at 512 g/s or 67.7 lb/min worth of airflow. The key here is that it will stop...
I was curious about the same issue a while back. The other poster is correct, the table has areas you will never need. GM cobbled what was available at the time and made it work. I have an...
A quick way to compare injector data tables is to visit the injector OEM web site, the tables are available for many of the more popular injectors, injector pulse width and other info too. Need to...
Boost modulation it sounds like, the ecm has program settings to adjust this condition, you can even disable it all together. Read-up on it, I am still messing around with the settings myself,...
E67 Mode Condition Values?
Are there any tuner 'preferred' values for fuel flow 'Mode Conditions' settings? It appears after reviewing logs that these values have no effect on actual fuel flow? ...
Thanks for the info, I have been just been multiplying the injector flow rate value x2 in the editor up to this point, wasn't aware that I could scale the value in editor? I did update the pulse...
Thanks, I haven't logged anything yet with this change, I am curious to see if the numbers actually change? Based on current numbers with the ECM not scaled as you see, just the normal 50% scaling,...
thank you, I scaled the ECM table with values to match the max values limitation of the FPCM? thanks for your feedback! Any tips about changing the N/A FPCM voltages? I figured that the ID1050x...
I installed a set of ID1050x injectors in my 2011 CTSV and performed the 50% scale/double stoich method for injector characterization using Injector Dynamics excel data for 'Flow Rate vs Pressure'...
I installed a set of ID1050x injectors in my 2011 CTSV and performed the 50% scale/double stoich method for injector characterization using Injector Dynamics excel data for 'Flow Rate vs Pressure'...