Search:

I'll do that.. Can a tech2 really tell me what the problem is though..!?

bump..!?

I've tried everthing... New sensor, checked the wiring and fuses with multimeter, vacuum from the intake manifold is definately there and normal.. When I pull the sensor's plug off while scanning,...

... I just took this scan today morning.. No throttle bliping, just hit the start button.. First start of the day so the car was cold... Attached is my tune and the idle scan... Would greatly...

77kpa at all times... Idle, cruising, WOT.. you name it, 77kpa it is !

thanks a lot for your help everyone... I ended up having to replace my map sensor cuz it was broken :-S

New sensor has been installed and all but I still get a constant 77kpa when scanning.. Going...

ElecTech : I will check the seal for cracks and fitment issues and post back here...

Russ K : Isn't the MAP sensor only used to calculate manifold pressure for fueling calculations after failure...

Cleaned the tranny cooler out and the area on the radiator is was mounted on and that made one hell of a difference.. I played around a lil and reduced timing at the idle cells 400~1200rpm which made...

hmmmm.. changing the Airflow Final Minimum made the idle much better.. It still swings between 900 and 1200 but its still better than before..

.. For some reason, I got the problem where my trans...

thank you so much Russ...

I've carried out the changes onto my tune and uploaded it into the car... Seems to be driving better.. Only problem is that the RPMs are at 1600+ in Park or Neutral, but...

here ya go Russ... :usa:

My car just got out of the garage for the installation of a ported fast 90 intake manifold and a Meziere EWP. I've been facing a few problems that I do not know how to tune out. I'm sure the issues...

Sounds great.. :cool:

There are no options within the Knock Sensors tab in HP-Tubers when connected to my vehicle.. 2005 A4 C6.. I was able to change the attack/decay rates but that's about it.. I'm getting some knock at...

Try 35.. I'd love to race you !

26 views and not a single reply... That's sad, especially cuz I just got a P0700 :(

2005 A4 z51 C6 Coupe
G5X3 114
LG Pro Headers
3500 Vigilante Stall
TransGo ShiftKit
160 Stat
Other misc parts...

I get some weird knock sometimes.. I think it's when the converter is stalling...

.. Spent most of yesterday tunning the car after installing headers, pulley, g5x3, vigilante 3500 converter and various minor miscellaneous mods..

The tune seems to be working very well but I'm...

Thanks a lot for the tips "EC Tune", much appreciated..! I have applied the changes you've recommended to the tune I've created.. I've also added a little bit of timing to both the high and low...

My car has been in the garage for a few weeks and I'm supposed to crank it out of there tomorrow.. I got the chance to scan an idle after feeding a tune I've made in.. This is my first time tunning a...

Hi everyone..!

My 2005 A4 Z51 C6 is going to the garage tomorrow for the installation of a few mods.. It'll take about a week or so to complete the installation of all parts! I have currently...

A friend of mine is asking me to load a stock tune into his 2001 M6 Camaro SS... I've searched on Horist and I wasn't able to find one..

I'm also wandering if its ok to load a 2002 M6 Camaro tune...