No offense to anyone that is using Blucat's software in conjunction with HP Tuners but after a couple of hours of trying that approach I went and purchased EFILive. There is no comparison in terms of...
Type: Posts; User: Tim05GTO
No offense to anyone that is using Blucat's software in conjunction with HP Tuners but after a couple of hours of trying that approach I went and purchased EFILive. There is no comparison in terms of...
Download a copy of Parallels and see if you can run it in a VM (using some HPTuners friendly version of Windows).
www.parallels.com
I use Parallels and it rocks.
Tim
The LC-1 A/F looks fine. Purple, I think you might be looking at the commanded A/F ratio.
It looks like a little bit of timing might need to be pulled.
Tim
I don't view this as an unreasonable request. I mimic this request with a spreadsheet. I make all changes to the primary table and the spreadsheet generates the secondary which I just need to copy...
Certified shops??? LOL
This should be good. Most on this board obviously "get it" but there are a lot of shops on other boards riding purely on hype. If a list ever does get published I would like...
Electrical Engineer (now doing Field Applications Engineering work for a major semiconductor distributor).
My top two lines are Intel and Freescale (Freescale micro is in the MPVI btw).
Tim
The ricers would love that! Maybe switch to a clear case with some pretty LEDs inside :)
Here are the files... I made these for my personal use. Some may find them useless but for me there are times when they come in very handy, particularly the MAF sheets.
Tim
Why not setup a filter in the histograms?
Seppo,
I have an E1505 as well. I have a Keyspan USA-19W that I have used without any issues with serial port based products including HP Tuners and EFI Live.
When you open the Keyspan Serial...
I have some spreadsheets I use... if you want them let me know.
I know alot of guys use the Paste Special feature but there are times I would rather go through the spreadsheet to hand manipulate...
Purple, this is one area where things can't be generalized as each combination will have different characteristics. From a pure theoretical point of view I would argue that going rich again at those...
Soundengineer,
I'm curious why you like to go rich again towards redline. I'm not in any way shape or form saying it isn't the right thing to do. I just would like to understand why you do it. The...
The flash on board is 2MB so this should be possible for most ECMs. If only the calibrations are being written there should be plenty of space.
Personally I'd rather see the Ford/Dodge stuff get...
Is COTs on or off?
Jimmyblue,
The last HPL posted has the misfires logged. The timing is extremely erratic.
Tim
Try running the CASE Learn procedure. Details can be found in the help file. Just search for "CASE Learn" and follow the directions.
Tim
Display the table... right click on that to insert a new PID.
Please log the misfires for each cylinder and post the log...
PID List -> Engine Diagnostics -> Misfire -> Misfire Current Cylinder #1 - #8
Also RPM, TPS, MAP, and Advance and KR.
Tim
I pulled a stock 03 file. I noticed in the PCMForLess tune that the idle timing is set to 28 degrees in the area where the car would be idling. Try setting those tables to stock in the PCMForless...
Good info. I'll take a closer look at the tune.
Can you post the stock file?
Tim
I would suggest you log the misfires for each cylinder and see if it is isolated to one cylinder or is global. A log of this would be very helpful as would a log of normal parameters.
I can only...
What are your mods?
Ok I spent some time going through the HPT file and there are some major issues. The timing problem is a result of you MAF table being very far off.
Your MAF table peaks at 260.7 g/s. This is...
No matter how it is done the current scheme lacks in flexibility. I'm sure someone will jump down my throat for suggesting that not everything is perfect with the software but as you start to use...