Alright all. So I got the truck back together. Having a no start issue when the e38 is flashed with an auto file. If I select manual flash file in truck will start from the key. Flashed the t-42 with...
Type: Posts; User: Sierra09
Alright all. So I got the truck back together. Having a no start issue when the e38 is flashed with an auto file. If I select manual flash file in truck will start from the key. Flashed the t-42 with...
These are my os ID numbers.. how dose one figure out what vin I would need that would work to flash through the SPS.
E38 OS-12639835
T-42 OS- 24243356
Would i be able to grab a tune off the...
Alright, is it possible to flash the 2008 T-42 to communicate with the 11 e38 using the GM SPS? I have a connection to the tool. Not sure the steps needed to complete this if it’s possible.
Thanks
Thanks for the reply alex14ss Got everything wired up, when I do a gather info on hp tuners both ecm (e38) an TCM T42 appear. I believe I am running into the t42 an e38 not being able to communicate...
Hello all
I?m swaping from a 6l80 to a 4l80 in a 2011 5.3 SCSB.
I got a harness (4l60) an t-42 out of a 08-09 truck.
I?m wiring this in an everything matches up correctly except for the X-109...
Hello all
I?m swaping from a 6l80 to a 4l80 in a 2011 5.3 SCSB.
I got a harness (4l60) an t-42 out of a 08-09 truck.
I?m wiring this in an everything matches up correctly except for the X-109...
Makes sense! I did notice could change it like that but was but was not sure if the tune had to be scaled while doing that. Thanks.
I will for sure add the TM back in it.
Hope someone can help out. I sent a message to hptuners an got told to ask here for a 2 bar OS witch from what I?m reading can?t be done. Is the only way to make this work is to use the afr table to...
it seems as I don't have an option to adjust the range as i do like the VVE table. i am able to edit the points that are there but not able to edit to extend the table? if i highlight the entire...
Just wondering if someone would be able to help me out in getting an OS change for my e38 ECM. or is it not necessary? The generic help button for HP Tuners dose not seem to work. I do not have the...
Perfect.... thanks a lot for your time :cool:
awesome!! thanks for that.
now when switching the tune over to a 2-3 bar OS, in the os tab it dose not has the ability to change OS. there is vatts 1-2 (Disabled) TCS patch (Applied?) manifold...
hello, looking for some assistance in changing my tune over to run de-capped injectors. have read through threads cannot find definite answer. i got a set, they have been flowed, this is the sheet i...
Hey Everyone. learned a pile with all of the information here that i spent all weekend reading through trying to fully understand this. i was wondering if i could get someones feed back on how i have...
Thanks a lot for the help guys this was a huge difference the fuel smell is way better throttle response is greatly improved and all out pull of the truck 👍
114lsa injector pulse width? i don't believe i have duty cycle unless that is it. pulse width is running 12.5-13ms @WOT
07gts stated that decreasing boundary is advancing so should i be dropping off...
Another question truck has headers no cats and the raw fuel smell is extrem. Not changing the stock boundry it probably will not help this? Any suggestions for that ?
i cant find that other thread now that say witch way going advances and retards EOIT. if Advancing would be increasing i would go say around 530ish? from 3,072-2,560 should i increase alittle more?...
Hey guys, been doing tons of reading on EOIT. I have a 212-218 .522-.529 comp cam and wasn't sure if doing EOIT was worth it. after reading this thread and seeing that a difference in a stock cam...
Following
Anybody help?
Alright guys i am having and issue with the throttle blade closing and i can not figure it out! It dose not begin to close until around 4500-5200 rpm dose anybody have in idea what this could be. i...
I believe I got it to work [50090-156]>20 my problem was I was not hitting average I was leaving it at none. The pid stays in the filter now. So could someone tell me how this works? Where ever the...
Okay sounds great I'll do that tonight when I get home. Thanks
okay, so here is where to problem is. for example if I go into my graph layout go to my fuel trims vs MAF or wideband vs MAF and then new variable I am logging throttle position in channel, insert...