bump
Type: Posts; User: fift5
bump
here is a tune and log i did the tune is the original, and the tune shows the idle until i let off the gas at the end
thanks
i dont know i have tried a couple things i can get it started and hold about 7-800 rpm but no idle
well no good i can get it to run but not idle , here is what i have , ill check my settings again
thanks guys
i copied everything in that column ( injector control ) ill give it a try at lunch , hope it works
thanks again
thanks dustin ,
i did get a tune it was 03 corvette ls6 i compared it to what i have there was some differences , were would i find flow/offset/pulse widths,, all i need is to get to run so i...
is this were you change it,i made mine match no good still wont idle
http://i1100.photobucket.com/albums/g407/robbie1965/ls6/injector_zpso6rdy3c4.jpg
i have a 5.3 that i have changed the intake to a ls6 , i used the injectors from that intake my tune was set for flex fuel , the motor will start but no idle , was told that maybe a little lean...
so leave it alone ??, here is what i am running its great all but the 1st to 2nd shift its kind of hard
thanks
ok i got it i think ,, i was able to to log here is 2 files
the larger dont have ST B! and ST B2 but the file has
i know its short term fuel trim what are they and are they needed ??
...
ok thanks i was able to add them to the chart ill try it this evening and see thanks again
i dont have a new one i can do one and post it , so just saying if i had d/l the 3.0 from scratch and opened it up would there be anything i need to do? , and what about id delete what i have and...
i pulled up a old scan and everything works ,, its sense i d/l the update they are not working ,, got any ideas
sorry i dont understand ,, everything was working before i upgraded to the new version and now i dont have readings on 7 things. i was thinking maybe i messed a setting somewhere,, i pulled up a...
when i did the update , i lost some scan items , 1 st of all everything looks different , and i dont have any info on -TPS, Inj both side ,, 02 both sides and LT-b1 &b2 ,, before i did update ...
bump
are you referring to the first tune i posted ?? and lowering do you mean smaller numbers
thanks for helping
what do you think
i played with a few things ,, and re saved it under a new name ( so i can go back ) and with these settings , 1st to 2nd was a little better but the rest was worse so i went back , can you...
when starting out it takes too long to shift to 2nd and i get a kinda hard jolt ,, i am not after a special tune , i dont have a lot of HP , just stock ,,
here is what i am running
thanks
i see now thanks , ill use them to compare with , my tune is a stock tune but great all but my shifting 1st to 2nd ,, ill take a look
ok i got it ,, i haven't done it , what does it mean when i go to load a file from the repository and it comes up and says unlicensed file, you dont have a license for this file , i have paid ...
how do i get a update to next version ,, i am running 2.24,, i dont see were to udate
thanks
were are shift pressure tables ? i must be over looking them