Thanks for taking the time to respond.
I think I have been given a rational explanation of ehat was going on. Something to do with the BCM or other modules trying to communicate with the PCM while...
Type: Posts; User: gtfoxy
Thanks for taking the time to respond.
I think I have been given a rational explanation of ehat was going on. Something to do with the BCM or other modules trying to communicate with the PCM while...
Sorry for the repost but I really need to get some input on what is going on & how I can fix it.
I just installed 2.24 & updated drivers for win 7.
Opened Scanner & connected to PCM. Radio...
I just installed 2.24 & updated drivers for win 7.
Opened Scanner & connected to PCM. Radio shut off so I turned the key off & then back on. Radio came back on & dash comes on but Car wont start &...
I'm really torn with what I want to do. Turbos would be easy HP, as I am quite versed in turbo system building, but there is some other things I want to try just to see what happens.
I will...
Well, I Fo'd on it. so it is a done deal.
I am no stranger to picking up on others peoples work. Doing it personaly then for others makes it not that big of a big deal to me. At the same time...
I looked into it & you are right, before Iread your post, ha....
There are no casting numbers n the heads on the tabs so Iwill have to pop off a VC to see what they are.
I will get under the...
Thanks for the input. The current owner didn't do the swap & only knows it has an LS2 timing cover so conclusively the rotating assembly is LS2. So if it is an all out LS2, or stroker, is the...
I have wanted one since they came out & now I found one that is similar to how I would do one, minus the turbo or KB. I haven't gone to look at it yet so I was wondering what you guys think.
Here...
Also, The MAF was changed after a turbo took a poop & leaked oil in it & wrecked the sensor. The new one is a Part store unit & the other one was out of an 04 5.3. Were the MAF air mass/output...
I noticed the high airflow at the low MAP also. In one map I did try to add some timing in those areas but it didn't help. It does this with any MAF we put in, so it could be a table issue but it...
I am helping a guy tune his 01 Silverado. The truck has had a turbo for over 3yrs now. Originally it was ran up to 15psi on E85. Ran real good for a number of years that way. Now the truck runs 91...
Can you advise where to find this table?
Title should Read Tuning AND injector help...
I have a 99 Blazer w/ a 5.3L and a HP tuner... It also has a 67mm turbo on it.
I would like to run E85, and a wideband... ~400hp or so on 9psi.
...
I am using a 99/00 PCM. It is for a 4.8/ 5.3 but I am not certain what flash program is in it.:shrug:
How easy is it to adapt a wideband into the logging functions?
I have a 99 Blazer I am puting a turbo 4.8 LS enigne in. The project is almost complete and I need a cost effective way to tune. I also may do additional tuning on other vehicles. I am sure that is...