Will there be any improvements for the MPVI2 data logging on EEC-V? Or is an upgrade to MPVI 3 going to be required?
Thanks
Type: Posts; User: corey1486
Will there be any improvements for the MPVI2 data logging on EEC-V? Or is an upgrade to MPVI 3 going to be required?
Thanks
Hello,
I am new to using HPT with Fords. I have some expierence with GM and Dodge. I have a question related to changing strategies.
I have a 2011 F150 engine/trans/wiring/PCM. If I write the...
I have a 99 cobra tune you can use. stock tune. are you using the gt pcm or did you get one from a cobra?
I have used it on my 99 Cobra. I didnt have any issues flashing. Data logging isnt great thought so im looking for a better solution for tuning/logging
Once you enter the correct injector data report back and let us know if there is any improvement.
Did you use a stock harness for the conversion? If so did you swap the injectors and coils wiring...
Tune Attached
I thought the throttle cracker was only active when the vehicle was moving? In the logs the vehicle is not moving, we were just in the driveway. Adding to base running airflow helps...
Anyone able to assist? I did play with the base running airflow tables today and now ive got the STIT improved. Still having the stalling issues on return to idle. Heres another log
Hey all
Engine in question;
LS2 SBE
Trickflow 215 heads
1.7 rocker arms
Fast 102
edelbrock 92mm DBC
stock ls2 injectors
long tube headers
Have you pulled your valve covers and checked things out? lifter ticking would likely indicate some kind of issue there. I had a similar issue on an LT1. I was getting misfires on multiple cylinders...
Did more troubleshooting. Switched the O2 sensors and problem stayed the same. Took the car to the exhaust shop and had them ensure everything was sealed up properly. Car is now smoking grey and...
I'm try swapping the sensors and see if it follows the sensor.
I haven't gotten any codes for misfires. Is there anything I can log or check with HP tuners for misfires?
Hey Everyone
Im new to hp tuners and im trying to log some data.
My setup;
95 LT1 with a Torqhead 24x converstion
cc503 cam and valvetrain upgrade
mid length headers, no cats, 3 inch from...