Search:

Type: Posts; User: kawilliams06

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    9
    Views
    3,126

    65592 65593 here are the request and...

    65592
    65593

    here are the request and recommendation. If there is anything else, anyone suggests, I'd appreciate it.
  2. Replies
    9
    Views
    3,126

    I run premium (91/93 octane), if possible I try...

    I run premium (91/93 octane), if possible I try to run non-ethanol fuel. Thanks for the assist.
  3. Replies
    9
    Views
    3,126

    Thanks for the advice. I'll get the PCM flashed...

    Thanks for the advice. I'll get the PCM flashed and change the log to have MAF taken out of the equation. In regards to timing and AFR. In y'all opinion, what is the ideal AFR when under boost? For...
  4. Replies
    9
    Views
    3,126

    Also in regards to removing the channels for MAF,...

    Also in regards to removing the channels for MAF, I am ensuring that the SES enable are de-selected? I did place the error mode to being MIL on first error.
  5. Replies
    9
    Views
    3,126

    I didn't think one could run closed loop while in...

    I didn't think one could run closed loop while in SD tuning? I may be mistaken for that.
  6. Replies
    9
    Views
    3,126

    Looking for Tune Advice

    Good evening and Early Merry Christmas.

    I've been adjusting my tune for some time, and I've gotten help with tweeks from several of y'all.

    I have an '01 Silverado 1500 5.3L V8. I've modified...
  7. So I may have gone a little drastic on changes...

    So I may have gone a little drastic on changes but here is what I have currently. I messed with the trans and still a work in progress with the VE table. Any suggestions?
  8. Here is a log from last night. It was 54F, 11C...

    Here is a log from last night. It was 54F, 11C out on my way into work. I'm in upstate NY. 53858
  9. Anyone help with my tune 5.3 maggie supercharged

    howdy, see if anyone would mind taking a look at my tune and offer suggestions. I'll run this tune tonight and log it for y'all to take a look at. Thanks in advance. Looking to create a fuel...
  10. Tweeking 5.3 LM7 with Maggie, any suggestions

    I've been tweeking my tune, not sure if there is anything I could do to improve what I've got. I'd like better fuel economy but also performance. Multiple tunes is definite. I've currently got a 3.4...
  11. Replies
    0
    Views
    1,082

    Suggestions for tuning? help

    Hey Y'all I'm working on tuning my '01 Silverado with a 5.3 with a maggie supercharger with a 2.8 inch pulley (original 3.4 inch), shorty gibson headers, full custom exhaust with built in cutouts,...
  12. been tweeking things a bit and I feel like I take...

    been tweeking things a bit and I feel like I take one step forward and two steps back. Attached are my current tune and the log to go with it. The knock that I'm seeing is not changing whenever I...
  13. Started to look at others with a similar setup...

    Started to look at others with a similar setup and found timing tables they were running, attached is the post-run adjusted tune and the log that was used to adjust the tune. Sorry for all the extras...
  14. so looking at the logs and thinking about...

    so looking at the logs and thinking about everything that is going on that I'm trying to resolve, I wondering if my engine load is the reason the truck stops accelerating until I let off the throttle...
  15. Sorry for the delay in response. I ran the truck...

    Sorry for the delay in response. I ran the truck a few times, and I feel like I resolved the issue of the misfire. attached are the tune with the log applied that is also attached. The only thing...
  16. So did some logging and tweeking of the VE table...

    So did some logging and tweeking of the VE table and messed a little with the spark tables. The issue I'm having now is that at about 6-7 psi the truck loses power and feels like it sputters out....
  17. So after getting cylinder 6 to fire correctly by...

    So after getting cylinder 6 to fire correctly by swapping another coil I had in the garage with cylinder 6, attached is the results log and the tune I'm currently working with. I did change the...
  18. Understood. 10/3. Cylinder 6 issue seems to...

    Understood.

    10/3. Cylinder 6 issue seems to have been resolved. I had some older MSD coil packs sitting in a box. Did a swap with cylinder 6. Fired up no issues, drove it around a bit. Shut it...
  19. I restored the PE table back to what it was...

    I restored the PE table back to what it was previous. Ran the truck for a bit, getting into boost before it booged down. I was able to get the cylinder 6 'misfire' but it still comes in once I turn...
  20. will do. as for the cylinder 6 issues, what would...

    will do. as for the cylinder 6 issues, what would you suggest looking at, I can try doing a swap again with another cylinder. Any other ideas?
  21. Here are two logs I ran earlier, with cylinder 6...

    Here are two logs I ran earlier, with cylinder 6 still not firing 100% of the time. I also noted the ambient temp based off the vehicle RTD located before the radiator.
  22. Tweeked a few things in the DTCs and removed the...

    Tweeked a few things in the DTCs and removed the ability for the Cats to be monitored. I dont know whether or not to re-enable the MAF sensor would help or my VE table needs more work first. attached...
  23. I tried that, and the problem still existed on...

    I tried that, and the problem still existed on cylinder 6. Checked for any grounds on cylinder 6 and only had the one ground that is suppose to exist based on the color and the electrical diagram for...
  24. Mecanicman here is the log file from tonight. At...

    Mecanicman here is the log file from tonight. At the beginning cylinder 6 didn't fire for a bit and then started firing again. When i say not firing, I mean no spark with the test light still in...
  25. Not sure, the right bank is running really lean...

    Not sure, the right bank is running really lean but I feel like thats a lack of not having spark and nothing being sent to the cylinder. I'll run a log on it tonight and let you see what I see. I...
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4