Thanks for taking a look , the second run in that log i got to 100% throttle my first run I guess I didn't have the peddle all the way down . I'm gonna work on the part throttle some more this...
Type: Posts; User: Pharcyde50
Thanks for taking a look , the second run in that log i got to 100% throttle my first run I guess I didn't have the peddle all the way down . I'm gonna work on the part throttle some more this...
Here is a tune I've been working on for my 2000 WS6 M6. Forged 370, CNC 243 heads milled .030, 234-242 eps cam, Fast 102& 102 TB its OLSD. Here is a WOT run i did today VE is pretty dialed in for...
Thanks!! Finally got the car back together and emailed support
Hello,
I had my laptop stolen and lost my stock tune (2000 Trans Am). Is there any way to change it to a 1 bar sd os, i already have the MAF enhancement ? or do i need to re license a stock tune...
Thanks for the write up :chug:
I have a question about a/c and fuel trims. I have my VE dialed in with a WBo2 but i noticed when I turn the a/c on the stft go to around +10 during idle is this normal? I currently have the ltft...
The truck tunes I have seen have way less than 22-24 degrees timing. I would probably try around 10 degrees max and go from there. With 22-24 it will probably ping if he tows anything. I've found...
Thanks Bill turned out to be a disconnected plug from the pcm through the firewall.
heres the shot everything looks good v2.4.6.0
Yes I get a green light with just the mpvi plugged into the car. My battery voltage is at 12.3V could that be a problem? The battery has been out of the car a few months. My neighbor has a cts-v...
I have a new version of hpt pro 2.22. Car is a 2000 trans am I just put in a new motor and need to adjust a couple of things to start the car and keep getting the can not connect to vcm message. ...