Search:

Hi everyone,

I hope someone can help me out with this car. Its a 2017 Shelby Supersnake. At wot the car feels great, no problems, everything looks good. But when accelerating with arround 23%...

Update: I also had to turn off VATS in the tune

Thank you for that!

I was able to find a schematic there which showed the tan & tan/black (communications wires) run from the ECU through the ABS module to the BCM and fuel pump module.

I...

Sorry to revive a super old thread, would you have more in depth schematics? im building a race car and need to fully delete the ABS module, but it won't start/run without it unfortunately

Hi Guys,

Thank you all for your input!

In the meantime I was contacted by @Mr.z0611 from this forum, and he helped me solve the issue

He has reduced the ETC area scalar. It was maxed out...

Anyone who could chip in? Im still fighting with it

Hi guys,

I installed a Katech 103mm tb on a C6 Z06 with the LS7 engine.

Was running fine before, but at idle with a light touch of the throttle it dips the rpm real low when it comes down, to...

apparently its pretty hard to get this tech2 here in Europe, and now this idea popped in my head;
Would it work if I order a manual Corvette's ECU from Ebay? they are pretty cheap as well

Appreciate it, thank you very much for helping us out!

well, if it was easy no one would do it hehe

but are you saying that this info can not be reached now?

So if im understanding correctly we need either the TCM and/or the original auto trans...

The service nr = 12597191

Thank you so much for your input, have attached the read to this message

Will not have time to verify this info until monday, but I get what you are saying, and will look in to it

Thanks again...

The problem is we did not build this, as far as we know All is taken out of a 2005 Corvette C6
All the components should be from that car, but the wiring, and ECU should have been modified by some...

Hi Guys,

I have a funny problem with an LS2

When the ignition is on and I press the gas pedal, the throttle opens 100%

When the engine is running, and I press the pedal the throttle only...