Thanks that did the trick! Runs well
Type: Posts; User: HSVTT
Thanks that did the trick! Runs well
Sent you email did you get it?
You will also have to drill a 1/4 inch hole in top of throttle blade. Just so you get enough air at idle depends on your cam overlap.PM Me your email I will send
Gee that's a big cam I would myself go VE gives you a lot more custom options in the tune. Your setup is very similar to mine I had stock injectors etc. If you put a cold air intake a run VE only my...
Ok cool I will try this,thanks I will try the changes above I will tell you how these go.
No I didn't. On the e38 computer it's a the VE table is a patch from HP Tuners, I'm not sure how to turn it off.the Older gen 3 computers blend from factory I could be wrong. Do you know how to...
I can't open tune on my phone is it SD or Maff? I only have SD tunes for mods like that. How big is the cam?
I have a really good tune for this combo but with a Fast intake I will send to you on Monday .Sunday your time as it is in my office. Will only work with 95 plus fuel. Made 483rwhp ran 11.3 in a G8.I...
This might be a real easy fix.My friends car was stolen and recovered luckily it dropped a valve on a main highway and was recovered before it disappeared. The problem I have after insurance payout...
No probs. there is a guy called Rodney from spareECM in Texas who is a real guru when it comes to ECM talk. He explained to e the service number and how they work. He also has a bench calibration...
Basically if you are still looking to swap ECM. Unless the operating system or service number on the back of the ECM is the same as the one you are using it won't work. All that will happen is when...
I have turbos aswell. Just get a EBoost 2 you can set the boost therw each gear. Have a look on youtube they show how it is done. I would say from the size of the turbo it is external wastegate, so...
Yea what sort of charger do you have? Is it computer controlled? You might be getting a bit confused. You might just need a 2.5 bar map sensor and a operating system conversion.
Yes that is correct I just did this last week myself. You licence it then relink vats and do a write entire.In my case I had a 2 bar operating system it didn't ask for the extra two credits to...
You will have to defanatly pull timing for the superchager from about 2000 onwards. And yes you will need to upgrade to a 2 bar operating system to tune this setup in boost. To understand how to tune...
Yea have a look. If not I run a E38 aswell I will send you my tune to look at and try you will just have to change for your injectors I have the same size motor. Haha Earthstrap! Aussie talk lol.
I Had I very similar problem. IDRIVEAG8GT might remember it at first I though it was the intake, then I flashed in a new computer still nothing. It was very bad under load like yours and I have a...
I found the problem bad earth on the back of the motor on the left head. (Loose bolt on earth strap)
Thanks Chris. I will try to get a log this weekend sometime it wont be a good one it runs bad. I know it is not the CATS because there is none(turbos sit nice there lol). I will have another look at...
Thanks Chris I will try it I hope it solves the problem i will keep looking.I just dont know why it is only one bank.the only thing left to me is the ECM.Missing good summer drives!! Is there anyone...
I have tried everything Chris,Coils wires,fuel pressure,injectors,vacuum leaks etc no luck.I have the other ECM ordered will it work?
No i think it is just damaged. One side of the motor runs intermittent, this happend straight after the flash, If I run a scan I get the normal error codes for no maf heater etc etc. If I delete the...
They should be highlighted. It only takes your credits when you chose a new operating system eg 2.5bar. It will prompt you when this happens, Sounds like you might have to talk to Bill from HP...
Hi my ECM died after a stupid flash while a friend turned the key. Becuase Im in Aust and everything is 5 times the price you guys get it for at GM. I need a new E38 service no 12612384, I have...
I have been tuning for about 2 years.You need alot of patience if you have no experience. I started tuning boost and one day got a bit exited with my progress on my twin turbo setup. I fitted a new...