Evening, Ed. Are you saying the codes should NOT be set to no error reported? The engine is being controlled by the Dominator. I just want the REP/Safety Mode message on the DIC to go away. For...
Type: Posts; User: angrygoat
Evening, Ed. Are you saying the codes should NOT be set to no error reported? The engine is being controlled by the Dominator. I just want the REP/Safety Mode message on the DIC to go away. For...
I've taken almost all control from the e40. The e40 still controls the DIC, a/c, trans, evap (I know, I'm a hippy), etc. I've maxed out all of the p0068 tables within HPT and set any DTCs for...
http://www.hptuners.com/forum/showthread.php?38780-2005-and-possibly-other-LLY-Reading-flashing-quirks
Nice tq pickup. Thanks for posting
This is the first I've read of this. Everything I've ever read about scaling says to scale anything with an airmass value in the table. Obviously, that isn't the rule. Can you venture a guess as...
Well G8GT, you called it. It was an issue with the final airflow minimum table. Apparently, it didnt appreciate me cutting it in half. I came across a post where I think DSteck and Greg were...
Not exactly. When I bring it just off idle, the engine revs up for a second or two and then the ETC% drops to 5-6% and the rpms fall to as low as 480.
No sir, it doesn't. Never goes down below commanded idle after a quick rev(~1400rpm)
Here's what I came up with tonight. I put the old TB back on and with either tune, all was good. A slight...
I'm experiencing a problem I have never encountered.
The background info: I ported my TB some months back but I got into the idle control area due to my over aggressiveness. No big deal, I...
I would appreciate if someone would take a look to see if I have anything screwed up. The list of changes include higher turbo vane position for more whistle, turbo brake, lowered boost in normal...
D: all of the above sir
Anything you are wIlling to explain, I'm listening
So let's go back to learning this stuff. Can someone explain the look up tables for base injector timing? What is this table for? Break it down barney style please
So here is why I ask. I have a stock cube GTO I am working on with a 50% scaled tune for 110lbs/hr injectors. The car has heads, cam, and tvs2300 @ 8-9psi. The scanner is showing 96% inj dc. I...
So I am a little lost. The first link posted a list of tables to change. However, I dont seem to be able to find the first few it says to change in my LLY. The first one says go to engine> tq...
Just curious if scaling a tune affects the reported inj dc.
I assume you mean on the gauge as just the stoich alone for ethanol is 9.77
I did see that thread but no one had posted any results as far as how much power it would add. Most of the changes seem small, 10%-20%, so I'm not overly concerned but I do fear for my trannys...
I would like someone to do a sanity check for me on what I have so far.
Specs:
2005 GTO M6
364 ci
tvs2300 @ 8-9psi
TFS 225 heads
110 lbs/hr injectors
Full exhaust
Snow Meth stage 1
Well I can no longer keep my grubby fingers out of my truck. Ive been trying not to mess with it because I was worried about getting greedy and frying the trans. I'll just have to find some self...
Well, she fired right up after making the corrections you pointed out though I will have to check the cranking ve to see if I did scale it or if I winged it. Thank you for taking a look Ed. After...
Thank you for repsponding, Ed. I appreciate you taking a look. I am working with an E40 LS2 GTO so I only have the primary and boost VE tables, no coefficients. No MAf on this setup, 2bar SD for...
This is my first attempt at scaling. Can someone please take a look and see if they see anything I missed. I was working off of a checklist I picked up off of the site and Motown's .xls workbook. ...
From my understanding, the beneifts of meth is octane and lower the intake charge temp. The same benefits are realized from E85. Since the octane ratings are virtually the same for both, the only...
This may be a silly question but here goes. It has been said numerous time that the most important setting is the ETC scalar setting for the 102 TB. Why is it labeled ETC and the info at the bottom...
Car and mods would be extremely helpful