Hi,
Does anyone know if the trans calculated gear ratio is controlled in any way by Line Pressure? If so any ideas or pointers on where to look? I have this car that when in either 5th or 6th gear...
Type: Posts; User: Charlie540i
Hi,
Does anyone know if the trans calculated gear ratio is controlled in any way by Line Pressure? If so any ideas or pointers on where to look? I have this car that when in either 5th or 6th gear...
Great! Can you keep me posted about what they say, so I can ask them for the same? I'll not be able to get to the car until first week of august.
Good to know. Guess I'll have to keep bugging them with the issue. Try opening up a ticket with support.
I opened a case and the response from engineering was that even if it doesn't appear to be applied, it is applied. Haven't tested it yet.
I know that this may sound dumb, but is there any specific procedure to install the patch on a GT500? Been working with one for a long time and no matter what I do the patch never gets applied. I saw...
Any info on how to do it on 2020's? Numbers seem wayyyy different to previous years and been trying to find a logic here with no luck. When using VCM it gives 494.8 as gear and 128.4 for tire on a...
Is there a document on Dodge Torque Sources specifically for the Throttle? I'm working on this car that when I go WOT it goes to Pedal, fueling is fine, but then it changes to Trans and it starts to...
Try to find a stock calibration for the car and do a compare. Check in torque management tip in mapped gear... the guy that worked on it before me copied and pasted all the parameters from a 8 speed...
This.
I need to know if there is a hidden limiter on a 2016 Camaro SS or if I change the Limiter, General, Source from GMLAN to Calibration will have any effect as I have changed everything the extreme cut...
Is this installed on an older vehicle? what you are using for fuel pump?
90485
That has been raised significantly and it still limits to 120.
Does anyone know how to remove the 120mph speed limiter on this vehicle? I tried raising the Limit By Airflow and Limit y Ambient with no luck as it still has the 120mph normal stock speed limiter.
...
Based on my personal experience they GT500s will do that when the Torque Module Switch is disabled. ECM 44770.
Done. Thanks
How do I get the application key from a MVPI Pro that was purchased from a wholesaler and the end user never registered it? Now he want to add more licenses, but when trying to register in the HP...
My 2016 Camaro had everything 100% stock and others including a 2018 ZL1/1LE stock are the same.
What Eric said... the ECU is slow and basically it can't keep up after 7000 and you have to just assume stuff and be lucky...
We have a 2.95 with the 8.35 lower on a 10 rib setup. Are you using the latest race tensioner or the regular newer style billet tensioner?
What combo of pulleys are you using for 18psi? We have a similar setup with stock cubes, but I'm only seeing 15-16psi.
A log would help.
Inj duty cycle is extremely high. I'm not there to see it, but it seems to me that it's knocking because it's extremely rich, even when the wideband and knock sensors are telling you everything is...
Give me your email and I can send them all.
Procharger canned tune out of a 2015 Challenger Scat Pack.
69761