I will give it a shot, it was around 25-26* range and seemed really smooth and idled great, just had that same issue. Idle got a bit rougher as I cut spark down using the bi-directional controls,...
Type: Posts; User: 1992-25th
I will give it a shot, it was around 25-26* range and seemed really smooth and idled great, just had that same issue. Idle got a bit rougher as I cut spark down using the bi-directional controls,...
I will try to get a set of gauges on it, would the switch allow me to engage the clutch while not running with the scanner but not while it's running?
^^^ what he said
messing with my truck and noticed that the A/C clutch is not engaging at all. at first i figured that i had fried my HVAC controls when doing a LED retrofit.
after messing with it a bit i found...
Been messing around with my new build and have noticed a problem and am not sure whats causing it.
When idling in park, if i bring rpms up at all the truck will not return to desired idle,...
I don't have the maf installed on mine, I just added some airflow to the maf table in the idle region so that the truck would idle with the maf not failed, but the maf is not installed.
I also...
Dealing with this same issue currently to get my truck passed, what I did was turn the MAF codes back on (all 3) and kept adding to the MAF table till the truck would idle on its own.
Seems to...
I have a buddy that has a 2007 dodge ram with the 5.7, he is looking at ripping all of the EVAP stuff off and was asking some questions about codes and the readiness monitors. I have messed with...
Thanks for the reply, truck is sitting around waiting for me to finish relocating shocks, I will log misfires and see what it's showing
Doing some random browsing today and stumbled accords a thread talking about CASE relearn. I have been messing around with The software for a bit but have never heard of this before. From the...
Check out this thread. As 5FDP stated if your in boost you should be in PE (or BE) if you have your tables setup correctly.
Desired AFR is up to you, again as stated you don't want to be at...
Thanks for the reply, it is a gen 3
I am in the process of building a base tune for my new project and have a quick question.
I am switching from my stock OS to a 12212156 OS in my silverado. I know I have to do a write entire for...
I am still using 2.24, does that make a difference?
If not I am pretty much screwed on using the 02 OS correct.
Can't seem to find a straight answer, some say yes some say no.
I have a 2000 Silverado that I want to apply a 2002 OS then a 3 bar SD COS to.
My state has emissions and the machine will...
Ok maybe I will just have to see, when I first wired them up the low side would come on and run anytime the key was on.
I did a little bit of digging and re-wired it and now neither fan will...
Now is swapping to the 12212156 OS necessary to get them to work even if I plan to a 3bar COS in the near future? Trucks not running yet, but the fans work fine with the bi-directional controls, but...
Yeah that's the problem I am having, I can't have them active when I go in for emissions, so I was hoping there was a way around setting the codes to "fail on first error" and still get it to work. ...
Disable them as in set them to "no error reported"?
pretty straight forward question but I seem to be getting mixed answers in all my searching. In order for me to pass emissions I cannot have any active DTC's and have to have readiness monitors...
If I am understanding your post correctly, there is no way to add a "supercharger tab" to the editor that I am aware of, some cars have them (GTP for example) because they are factory tables.
...
Where are you in Utah? I would also get a wideband hooked up and make adjustments from there, I am in Logan, i might be able to help if you need
Been trying to read up on this the past few days and am having a really hard time deciding which way I should go about it. I am just finishing up my wiring harness and can't decide on if I should...
Awesome, then that's the way will go! Thanks for the replies !!
Do I not have to license the file I do the segment swap with? I figured that I did so that's the reason for my question as I figured it would cost the same amount of credits anyway