Search:

Or at least supply the correct instructions. lol

Got it straightened out. Could only happen to me lol. I got back in touch with PLX and after bringing up the negative volt readings again the tech realized the problem. The instructions and tests he...

It seems that way to me. Hoping to hear back from them soon.

Either way, running or not it will read 19.8 Shan you disconect it it gradually goes back to around 10.4 today. Lol

Getting back in touch with PLX to see what they think, this is a new unit.

Had a chance to do some testing and have come to the conclusion this thing is getting canned. When reversing the ground and WB out terminals the voltage readings switch to V+ but also read 8.0 volts,...

I'll try it and see if the voltage output is normal before connecting it to the MPVI just in case.

The power cable is clearly marked RED +, BLACK - Could something be wired wrong in the module? I suppose it could be. Could they have the wires reversed on the plug itself? I suppose it could be....

I've been ready to do it for a while but am so involved in figuring this out. lol. Are you speaking from experience?

I noticed that during testing and mentioned it to the tech but he said everything was normal.

I did try and got the same results. I also tried adding a second ground to a different location. Before doing the diagnosing with PLX I also tried a new sensor just to make sure but after testing the...

I also have pics of all the readings taken from the PLX as instructed by them if of any use.

Actually it bounces from 10.0 10.01 although I don't think that's significant. Here is a log of a sample reading

Thanks for your reply. There is a little history with this. I've been working back and forth with PLX for a week or so. They had me run a series of tests and everything checks out good. What we found...

Hi

I've been trying to set up a PLX wideband with the MPV1 interface. I can see it in the channels but reading stays at 10.0. Here is a screen shot of the channel set-up if it helps at all.60782