We have numerous clients that were originally tuned on the "shops" MPVi1. And some are asking why the previously purchased credits can't be moved to their newly purchased MVPi2. They want and are...
Type: Posts; User: Carlyle_Eric
We have numerous clients that were originally tuned on the "shops" MPVi1. And some are asking why the previously purchased credits can't be moved to their newly purchased MVPi2. They want and are...
A lot of the newer vehicles require this. Not just Dodge.
Only need it for the first couple flashes of the day for that vehicle. Then you can drive around for undetermined amount of time before you need internet again. Newer GM's and Ford are the same.
Torque Mgt Advance is probably wreaking havoc at light cruise. Need to log that. And your LTFT's are off.
2017 ZL1 A10 with all the mods needed to support a Whipple on E85. Now with JUST the blower upgraded, during decal the TCS light blinks. Yet I can not feel any intervention from the TCS. I tried...
Got it! Thanks...
Like the subject says. Where is does the smart access cable connection located in a 2018 Charger Hellcat??? Thanks
Yes, it was figured out. :)
This is not a Z06 that is having the issue. C7 Base on SD. And I just want a fix for the cruise control.
I have proof. We are running a couple of our C7's SD with no issue other than no cruise control.
I found another thread about this. But never a solution. Any fixes for this yet?
Any info for us tuners on this feature yet?
https://www.facebook.com/palmbeachdyno/videos/2068537583471781/
Any info on this yet with 3.? I need it to trigger an output for a solenoid.
Do we have a TCM file yet?
What exactly are the details about this cable? I ordered one. Just curious if it was a one-time purchase to be able to access all 18+ dodge/jeep. Or if needs one per vehicle, VIN locked? Also, does...
Found out earlier that D1@bl0 IS in fact going to support the TrackHawk.
Confirmed yesterday that D1@bl0 isn't even considering dealing with this platform. Official word is "There won't be enough of them to make us the profit margin needed for our business model".
Yeah. What's the story with this? Have one on the dyno for baselines before a intake. Can't even pull the tune with the most recent Beta. Wonder if Livernois is using D1@bl0?
GrannySShifting.... I am having the same issue. ALL limiters are set to 7500. Yet when tuning on the dyno in 7th gear, I get fuel cut at 6900rpm. This is a 2018 A10 car. So I am starting to dig...
Jay.... did you have any issues with your car throwing a P012B(TIP Sensor range/performance) code with your Whipple? I am having an issue with that code. Idle and WOT are fine. Only happens at part...