Finally got the car drivable, and my intent was to fully road tune it myself but I had an opportunity to take it to a local tuner and did it as I was running into somewhat of a deadline.
The car...
Type: Posts; User: SidTheKidd
Finally got the car drivable, and my intent was to fully road tune it myself but I had an opportunity to take it to a local tuner and did it as I was running into somewhat of a deadline.
The car...
Yes. I am. Machined the IAC ports larger and also put an oil seal around the shaft on the return spring side.
Is there such a thing as the TPS voltage too low at the idle position? Mine is .18v at 0% and 4.06v at 100%
Attached is the log showing position from closed to wide open.
121028
I am having...
Bill.
I have contacted support . It?s ticket number 37487
I have been getting this message when I am trying to do a write entire.
I saved my ?as found? tune to my pc. Then opened that tune and applied a 2bar OS to it. Saved that file under a new name...
Appreciate the info on the siemens 60#.
Digging it back up finally. Been a minute
Wondering if anyone had a tune I could reference for a tvs2300, 2bar VE table and 60# Siemens injectors with a boost referenced pressure regulator.
I will keep that in mind. I didn't know about that option.
As of now the MAF is located in a straight section of the intake tract, probably 6" of straight 4" pipe on either side. If I were to tune it with the MAF, how do you adjust for the 2 bar MAP? I know...
SD tune was my original plan. I am not quite at the tuning stage yet, but I am trying to get my ducks in a row for when that comes so I am not blindsided by things.
The MAF was in the middle of the...
Wondering if you fellas could help me get a couple questions answered about my project that I am going to take a wack at tuning.
To start the engine is a 99 LS1/T56 in a 69 Camaro. I installed a...