ok thanks for the help
Type: Posts; User: jason k
ok thanks for the help
thanks for the reply
is stoich ok during part throttle cruise?? most things i read always say 13-14 for part throttle cruise. I am little nervous on this one i built the engine about 80,000...
hi i have a small list of questions first off I am tuning my 03 2500 hd truck it has a 6.0, stock bottom, end small cam texas speed 216/220 @.050, 550 lift, 110 lsa, stock small chamber 5.3...
i switched my platform option from gmt800 to f body, and swapped over all differences in the calibration from truck to f body, when I swapped a lq4 into my 95 f body. I wired in the ac and...
I tried deleting my wideband and then setting them up again and now I see what I think is the problem. the Daytona wideband is only listed as an equivalence sensor not an air/fuel ratio is there...
trying to log arf error for tuning my maf and the scanner won't populate. when I checked to see what I am not logging by hitting control m, it has air fuel ratio sensor highlighted in red. I am...
hi I have a 6.0 swapped 94 Camaro. I am running a pcm from a 04 express and a cable drive tb. When the ac is on the car idles ok when stopped, but while moving at any speed in neutral it idles...
Even tho I previously licensed it ? All I did was reflash it
I swapped pcms in my Camaro, which was from a van that I pulled with the engine to one I have already licensed with a vin ive already licensed, then reprogrammed it with my pass thru programmer...
can I program a different operating system into a gen 3 pcm?? I have a pcm service number 12586243 from a 03 express that I want to use in my 95 f body but that pinout has no tach output. can...
you can add a speed sensor and reluctor wheel to the 400 I'm running it in my f body on vacation right now so I don't have all the info on what I used but its google searchable I found...
Some of the pins are different and the main issue is there is no tach output from the pcm on the express version and when I installed it I left the pin out the same as a truck configuration I had no...
hi I have a 95 f body I installed a 6.0 in and was using the pcm from that truck for the swap. I now put that truck back together with that pcm . so I installed a pcm of different service number and...
hi I have a 95 f body I installed a 6.0 in and was using the pcm from that truck for the swap. I now put that truck back together with that pcm . so I installed a pcm of different service...
I installed a used cluster in a customers 04 savanna and I reprogrammed it with my pass thru but there is no place to input new mileage anyone have any ideas?? thanks
when I click on write entire I get a red BRICKABLE warning should I be scared??
all I am trying to do is flash the stock file back to the pcm
I am trying to flash my truck pcm and get an error message " write calibration selected for (p59) but operating system ID's are different " and it wont write the calibration the pcm...
i watched him tune it and looked like a bunch of copy and paste from other tunes but what really bothered me tho was the massive smoothing of my ve table he did without even running or looking at...
put what back to stock? everything? why what is so bad about it the car made 460 to the tire has a decent a/f ratio and runs good obviously I built it and have to warranty it so...
I built an engine for a customer 383 ls6 with cnc heads, cam, long tubes, etc for a 2004 vette. I got the tune semi close using the tuning school methods I did a VE tune, MAF tune, WOT MAF tune,...
or leave it if no starting issues?
thanks
next question when doing a ve tune on a stroker with a head and cam change should I copy the main ve table to the cranking ve and scale it down since cranking is a % of main
when tuning a maf for wot and I get a high error not at wot, when getting ready to make the pull, should I leave that out when copy and pasting into the new tune??6090260903
that absolutely sounds like a mechanical problem inside the unit parking pawl dragging? maybe a snap ring on the output ring gear left out and the splines stripping??