You might download the latest beta and try to read entire again
If it still doing the same thing, I would save the info log along with the file you pull and send to support for help
Type: Posts; User: lsp408
You might download the latest beta and try to read entire again
If it still doing the same thing, I would save the info log along with the file you pull and send to support for help
is your car canadian spec and the speedo just switch from km/h to MPH? makes sense, on US spec car has 200+ mph speedo. and thats 320 km/h
I use the pid mentioned in "working with the e78 ECM"
I'll eventually get the 180 or 160 stat and radiator but at the mean time, whatever I can do to help without keep the fan running 100% of the time.
When you said you are a lot more aggressive,...
Try to post the unlocked file again?
Question, your MAF2 is all 0... I could be wrong but when I initially using 2.24 tune my car, Change MAF will not update MAF2 thus cause car ran like crap. something internal was fighting with each...
still locked on 6 good tune file
What is the desire ECT? Stock is set at 221F.
Is this what defines the normal operating temperature? Because ECU will try to operate engine coolant at that temperature by adjust fan. But there is...
stock?
Good deal. Thanks for the help.
The only one I know of is from the tuning school in Tampa FL. But that one is for c7 specific.
I was looking through my file (2014 c7) and went ahead changed the map sensor setting to zr1 sensor 3 bar (Linear 312.50 Kpa and offset -11.25 Kpa) then I saw the setting for AAP1, AAP2, and AAP3
...
I understand. It's all good
Can you post the file? Interesting in seeing what changes were made to the tune
I had issue with 2.25 beta to write calibration so I ended up using 2.24 that was downloaded one week ago I believe.
I know the MAF2 did not automatically update from MAF. Maybe that was the...
Hi, I download latest 2.25 beta on 7/23/2015 and I was able to read entire off my 2014 c7. However, when I ready to write calibration, it got timeout at download bootlog and nothing else I can do.
...
My friend and I were tuning my 2014 c7 with D1SC, we were doing MAF tune and saw there were MAF and MAF2. The MAF2 description says its for twin turbo application.
Our initial issue was we only...
Correct. It was an option for FWD with NA 3.5
I just saw the email from support that suggested either tri core or esys. Last time I was messing around and just starting from top of list for ford...
2013 ford police interceptor sedan 3.5 FWD (Taurus)
I have been doing some research and found ARH long tube got wideband bung installed at the x pipe and pfade has bung right after narrowband on passenger side. So in the end, I guess it can go either...
I appreciated for you answer and sorry for your lost. That is the reason I ask this question here. I guess making sure laptop battery is fully charged is the most important thing.
Hi all, my name is Li and I am new to car tuning. I am always fascinated by people sitting behind laptop with magic and make car go fast. Now I just got me HP Tuners and I am hoping to understand...
Thank you very much for the info. I was wondering about all these warning and wanted to confirm it before I make rookie mistake.
Can I plug in my laptop to 120 ac outlet in the garage while connect to the car using HP tuner?
Cool. Thanks for the reply.