2014 Focus ST in waiting...
Type: Posts; User: gtorep
2014 Focus ST in waiting...
Checking the log out with the slimmed down config is showing no drastic drop like before. The line is not smooth, but it might be turbulence from not having a screen.
Thats my generic setup, ill switch and log some more later.
Come to think of it you might be right, the idle will sometimes hang at 2000rpms after a WOT pull, until you give it a second to collect its thoughts and it returns to normal. But on this tune the...
Here you go, my WOT starts around 8:43 of the log, quick 2nd and 3rd pull. Watching closer the MAF hits 10907hz then begins to flutter back and forth between 10307hz, 10900hz, and 10200hz. Wideband...
Its increasing as it should, up to 11500hz and the wideband afr is holding steady with the injectors only seeing about 71% DC
First, I do not have my log or tune availible since I am at work and will be here late. But I would like to know if anyone has experianced this or could shed light on the issue.
I was logging the...
Solved problem, the MAF DTCs were set to no errors, changed them to the proper setting and all is well in the world.
I need a little help with an OS issue. I am currently in the process of trying to switch to a 1 Bar SD OS.
I bought the Licensce for MAF Ehanced RTT for my 2004 GTO back in 2006 and have been...
The cable reports the same situation on everycar its licensed for. Its a hardware issue.
Thanks Bill, Ill report back tomorrow, useless info but my obd2 cable is about 7 years old, and the MPVI was upgrade to the pro about 2 1/2 years ago, Ill check another vehicle and get back to you.
http://i60.photobucket.com/albums/h39/joelnorton481/screencap2.jpg
Bill, here is the screencap. Once the MPVI cable is plugged in the OBD2 port the green led slowly lights to a flicker and...
Gentleman,
HPT Cable tells my laptop that it cannot connect because vehicle is not supplying power to the obd2 connector. I tried all the tricks like disconnecting the battery and checking BCM/PCM...
Right now I am having an issue where im have to comand a much richer AFR in order to get to 12.8/13.1 at WOT. Im having to comand like a 11.2 AFR in order to get the actual where it needs to be. When...
Thanks,
Sorry ive been busy, but I got it on this one a couple of times.
Im not sure what it is, check out around minute 12:28 1st and 2nd gear pull.
Will log and post a fresh one after work. Stay tuned
Gentlemen,
Im having an interesting gremlin starting to pop its little head out, whats happening while logging is my car at WOT reads 99kpa up to 6200rpms, then between 6200and 6700 it drops down...
I found a starting point equation, thanks man
I forgot to mention that the connection is through the pro interface.
For someone whos pretty new at this, what is the proper way to do this, what is needed in the PID, how do I configure this, since the default lc1 setting is off?
"Im newwww, I dont know what to...
Yes, Comanded AFR is 14.4 and logworks show 14.2-3 but the LC-1 display is showing 15.4, Im sure ill find this as soon as i start looking but just in case where do I change the offset in the scanner?...
New to posting and to widebands so please forgive me if my lingo is off, Im having something strange go on, using my LC-1 through the interface, and im coming up with like 1.5 to 2 split between Lc-1...