nevermind thank you for your help
Type: Posts; User: j27
nevermind thank you for your help
can you point me in the direction to be able to do that
I have attached a log for a l31/4l60e. The problem I am having is in VCM scanner I am seeing the chart log g/cyl steadily decreasing at the end of first gear while at the same point the histogram...
you need to license it, change the vin, and then write entire
here is the current file from my truck it has the egr, air injection, torque management deleted, twin electric fans, 3.73 gears, 33in tires, lean cruise enabled, dfco increased slightly, wot afr...
I set my high out put to 2 and low out put to 1 and that got me pretty close
That is pretty much how mine went and I see you have the same problem with the tack reading high
http://youtu.be/6Jox6sdvDQ8
from what I found it has to do with cylinder airmass calculations but I'm not sure
This is how I set mine up you have to go to the ac tab and change it to fan #2 or nothing will work except for fan 1 with the ac off.
yes you do a right all to change from 4.3 to 5.7 and another write all to change the vin (you can just retype the vin in calibration details then do a write all that is how I did mine which is an 01...
it is a 4l60e and I was looking for the pid but could not find it, do you know which drop down menu it is under?
Hello all what I have is an 01 s10 with a 5.7 vortec swap with a 4l60. I can not get the gauge cluster to display the transmission position (PRNDL) how can i read in hpt what position the pcm is...
same problem here, I found it to be that hpt does not support the 6 speed auto tcm in these cars
I found that my factory rpm gauge is reading 800 rpm at idle when hpt is reading 650 how can I correct this?
I made the changes and now it works thank you.
Ok I;m having a few problems with my truck after I swapped a 5.7 vortec into it. I can't get the truck to do a case learn and my rpm limits are not working. I have them set to 4000rpm in p/n and 5600...
I would love to see this for the e37 os:12610011
Can we get a tread with a running list of the supported vehicles as well as changes made to each version of the beta so people don't have to keep making new threads cluttering the forum just to ask...
so does that mean you will also be releasing general support for the t76 used on the 6 speed auto's throughout gm's line of fwd cars as well or just for the 6t30 in the cruze.
yes it works just like that just do a write entire and you will need to re license the pcm with the van vin
is this for a cobalt because I am trying to learn the same thing
I have a 2.2 cobalt with a 4t45 can someone point me in the right direction on where i should begin to learn about trans tuning.
So is there no support for the 07 sIII 3800 grand prix just the GXP?
Ok Thanks
I am swapping a 5.7 vortec L31 with an 0411 into an s10. The 5.7 one wire knock sensor will not clear the motor mount but I can mount the 4.3 vortec 2 wire knock sensor, is there a way to use the 2...